You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Ed Webb
(800) 374-5009 ext.  377
Intl. +1 (704) 841-2001
Ed.Webb@exfactory.com





If not available, try his/her backup:
Louis Sicotte ext 329
louis.sicotte@exfactory.com


EXF #:   EU-281161  
Brand/Model:  

BRANDT KD 79/2 CF

Machine Type:  

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Year of Mfg.:   2001
Condition:   As Is Condition   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New: $ 70,000    Act Now!
Price: $   8,950 USD     (Convert)
Financing:   $ 182 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)

Description:

BRANDT KD-79 2CF EDGEBANDER WITH CORNER ROUNDING 

0.4 - 13 mm (0.016" - 1/2") Edge thickness cap., automatic coil & strip feed magazine, heavy duty guillotine for cutting 3 mm PVC coils, 12 mm - 50 mm (1/2" - 2") panel thickness.

Equipped with: 

  • Fast start-up granulate glue system (approx. 12 Min heatup time); Quick-change glue tank for easy maintenance and glue color change. Reversible rotation and rectractable glue roller.
  • Infrared Radiant Quartz heating unit between glue applicator roller and pressure zone.
  • 4-Roller pressure zone with powered large dia. first roller.

    Workstations:
  • Double motor end trimming unit (0.33 HP - 12,000 RPM), pneumatic indexing via program control, straight or chamfer up to 15° mounted on precision THK ways.
  • 1st Top & bottom fine trimming unit (0.5 HP - 12,000 RPM) 0° to 25° tiltable.
  • 2nd Top & bottom fine trimming unit (0.5 HP - 12,000 RPM) 0° to 25° tiltable.
  • 2-Motor Top & bottom contour trimming corner rounding unit (0.5 HP - 12,000 RPM motor ea.).
  • Top & bottom scraping unit for radius finishing of thick PVC top & bottom edges.
  • Top & bottom buffing unit at 2,800 RPM.
  • Electronic frequency inverter for all trimming motors; also incorporates electronic motor brakes.

    Operator & Machine Controls:
  • PC-16 program control system for & increased reliability and diagnostic with passive matrix 7.4" Color LCD screen. 8 mb IDE Flash Disc 100 mhz 486 DX4 Hard Drive, 8 mb RAM.
  • Internal Modem for remote diagnostic link.

    Features:
  • Powered height adjustment of the top pressure beam; panel spacing "signal light" at infeed, extended infeed fence and a 36 FPM feed speed; includes set of used tooling.

    NOTE: This machine requires a new PCM which went down in April. We decided to buy a new machine due to workload and time being down to fix this.
Special Note: Bargain
Comment: Very low price! Requires new control panel - Still Make offer!.
*Dimensions: 270" L x 52" W x 72" H
*Weight: 5,955 Lbs
Written By: Original Seller
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions