B & K BK 84 5-HI Precision Roller Leveler Number of rolls 19
Leveler roll diameter 1.75"
Leveler roll face width 72"
Strip width 72"
Strip thickness 0.021" - .132"
Line speed 150 FPM
Line direction: left to right
Motor 100 HP
Equipped with:
...
Read More
Year of Mfg: 2007
Cond: Good Condition
|
|
BRADBURY 10 Stand x 1-1/2″ x 37″ 130 Roll Forming Line
Specifications: Maximum coil weight 20,000 Lbs
Coil ID range 20-24″
Maximum coil OD 72″
Line orientation left to right
Line speed 150 FPM
Complete line equipped w...
Read More
Year of Mfg:
Cond: Good Condition
|
|
COILMATE CM-5048 Pallet Style Uncoiler Capacity 5,000 Lbs
Coil max O.D. 48"
Coil I.D. 10"-20"
Coil stack height 37"
Turntable speed 0-23 RPM
Equipped with;
Bi-directional rotation
Dancer Arm and Potentiometer
Direct Chain Driven D.C. Rege...
Read More
Year of Mfg: 1999
Cond: Good Condition
|
|
HERR-VOSS 76-1-11/16-23-9 Corrective Roller Leveler
Number of Rolls 23.
Work Roll Diameter 1.687".
Work Roll Face Length 76".
Back-Up Skate Wheel Diameter 3.50".
Distance Between Housings 76".
Width Capacity: 0" – 62".
Thickness Capacity &nbs...
Read More
Year of Mfg: 1949
Cond: Good Condition
|
|
IMCAR (CAREL) CPHV-120 5” x 5” x 1/2” - Double Initial Pinch Universal Hydraulic Single Bending Roll
Specifications: Flats, Hard: 5” x 7/8” Ø 60”
Flats, Easy: 8” x 2” Ø 48”
Square Bar Ba...
Read More
Year of Mfg: 2002
Cond: Very good condition
|
|
IOWA PRECISION 60" x 30000 Lb SLEAR 3 Multi Blanking Line
Specifications: Material width: 12" - 60...
Read More
Comment: Act fast this is a limited time offer!
Year of Mfg:
Cond: Good Condition
|
|
KAMPF 69" x 0.015" Aluminum Slitting Line
Specifications: Material processed alum. alloys; 1145, 1100, 3003, 7...
Read More
Comment: Can be seen under power!
Year of Mfg: 2001
Cond: Very good condition
|
|
OCTAGON PRO-ECO 72" x .135" x 50,000Lbs Loop Slitting Line
Specifications: Material width 12" - 72"
Material thickness .020" - .135"
Weight capacity 50,000 Lbs
Coil ID 20" - 24"
Coil OD 72"
Line speed 900 FPM
Direction - right to l...
Read More
Year of Mfg:
Cond: Good Condition
|
|
PROMA 1-3/4 DH-02 9 Stand Roll Former Spindle diameter 1-3/4"
Spindle keyway 1/4" x 1/8"
Base To spindle bottom 6-5/8"
Roll space 18" to 152"
Horizontal centers 8"
Vertical centers 4-1/2" to 5-1/2"
Spindle gear ratio 1:1.5
Driving housing reduction ratio 3:1
Mo...
Read More
Year of Mfg: 1986
Cond: Cleaned and checked
|
|
RBI MANDREL RM 72-30 Uncoiler with Coil Car
Specifications:
Coil reel capacity 40,000 lbs
Max. width: 48"
Coil Storage Unit
Floor Standing Coil Car
Mandrel Uncoiler
Motorized Expansion
Hold Down Roll
Powered
Read More
Year of Mfg:
Cond: Good Condition
|
|
ROWE C8-50 Coil Straightener Maximum coil width 50"
Straightening roll diameter 4.5"
Maximum thickness capacity .160"
Minimum thickness capacity .030"
Feed rate 35 - 200 FPM
Motor 10 HP
Equipped with:
Coil breaker rolls
Exit Catenary rolls
Read More
Year of Mfg:
Cond: Good Condition
|
|
RUESCH STAMCO 26" X 0.10" Slitting Line
Specifications: Double loop design
Max. sheet width 26"
Equipped with tooling for 1" wide strips
Sheet thickness (Min. - Max.) .005" - 0.1"
Coil weight 10,000 Lbs
Max. coil O.D. 60"
Direction...
Read More
Year of Mfg:
Cond: Good Condition
|
|
STAMCO 60" X .187 X 50,000# Loop Slitting Line
Specifications: Material Width: 12" - 60" (Recoiler Mandrel is...
Read More
Comment: A machine in this condition and specification is hard to find...
Year of Mfg:
Cond: Good Condition
|
|
STAMCO 60" X .188" X 60,000# Loop Slitting Line
Specifications: Width 60"
Gauge thickness .020"-.188"
Coil weight 60,000 Lbs.
Coil I.D: 20"-30"
Coil OD 72"
Line speed 2 speed 750 FPM in Low Gear /1500 FPM in high gear
Line di...
Read More
Year of Mfg: 1998
Cond: Good Condition
|
|
STAMCO 72" X .135" X 60,000 LB Loop Slitting Line
Specifications: Coil width 12" - 72"
Material thickness .020" - .135"
Coil weight 60,000Lb
Coil ID 20" - 24"
Coil OD 72"
Line speed 750 - 1500 FPM
Line direction Left to Right
...
Read More
Year of Mfg:
Cond: Good Condition
SOLD
|
|
YODER M2 Roll Forming Line with PERFECTO Uncoiler and DELTA Straightener
Specifications: Number of Included Stands: 11
Max. Number of Stands Machine Will Accommodate: 13
Shaft Diameter: 3”
Roll Space: 48”
Horizontal ...
Read More
Year of Mfg:
Cond: Very good condition
|