HOME > TURNING MACHINERY > TQ-300013 > RETURN

ACRA SGT-51120 MANUAL LATHE



For Immediate Help Contact:
Dale Granger
(800) 374-5009 ext. 331
Intl. +1 (704) 841-2001
Dale.Granger@exfactory.com
If not available, try his/her backup:
Marvin Spehar ext.452
Marvin.Spehar@exfactory.com
Brand:  

ACRA

Model:   SGT-51120
Machine Type:  

MANUAL LATHE

Year of Mfg.:   2022
Condition:   Brand New w/Warranty  
Elect./Voltage:   220 or 460 V, 60 Cy, 3 Ph
EXF #:   TQ-300013
List Price:   $ 117,650  
Our Price:   $ 117,650 USD     (Convert)
Financing: $ 2,351 National Capital Leasing
Description:    (view full)

ACRA SGT-51120 Large Bore Gap Bed Engine Lathe


  • Swing over bed 51".
  • Swing over cross slide 40".
  • Swing over gap 72".
  • Width of gap 26".
  • Distance between centers 120".
  • Spindle bore 9".
  • Spindle nose A2-15.
  • Spindle taper MT6.
  • Cross slide travel 25".
  • Spindle speed (12)  3 - 3000
  • Inch threads (70) 1/4 - 30 TPI.
  • Metric threads (62) 1 - 120 mm.
  • Modular threads (53) 0.25 - 30 MP
  • Diametral threads (70)  1-120 DP.
  • Lead screw diameter 2.25".
  • Lead screw pitch 2 TPI.
  • Tailstock quill taper MT6.
  • Tailstock quill diameter 4 7/8".
  • Tailstock quill travel 13 3/8".
  • Motor 30 HP.

    Equipped with:
  • Halogen work light
  • 4-way tool holder
  • Rapid travel
  • Coolant system

     
Special Note:
Comment:
Written By: Bill Merrigan  
*Dimensions:Available from product manager
*Weight:Please call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

A lathe is a machine tool that rotates its workpiece along a central spindle against a stationary cutting tool to both remove unwanted material and provide a better, smoother finish. The part is held between headstock and tailstock (the distance between centers) in a process called turning.  They are used in the manufacture of cylindrically shaped products.  In the case of larger pieces, steady rests may be used to support the workiece.  Workpieces are set up most commonly with 3 or 4 jaw chucks or collet chucks.  They can range from small, highly accurate tool room lathes to the large bore, large sized machinery common to the oil tool industry.