HOME > TURNING MACHINERY > TQ-300004 > RETURN

ACRA 1440A MANUAL LATHE


For Immediate Help Contact:
Dale Granger
(800) 374-5009 ext. 331
Intl. +1 (704) 841-2001
Dale.Granger@exfactory.com
If not available, try his/her backup:
Marvin Spehar ext.452
Marvin.Spehar@exfactory.com
Brand:  

ACRA

Model:   1440A
Machine Type:  

MANUAL LATHE

Year of Mfg.:   2022
Condition:   Brand New w/Warranty  
Elect./Voltage:   220 V, 60 Cy, 3 Ph.
EXF #:   TQ-300004
List Price:   $ 7,900  
Our Price:   $ 7,900 USD     (Convert)
Financing: $ 161 National Capital Leasing
Description:    (view full)

ACRA 1440A Geared Head Engine Lathe

  • Swing over bed 14".
  • Distance between centers 40".
  • Swing over cross slide 6.6".
  • Swing in gap 19.92".
  • Spindle hole diameter 1.5".
  • Spindle type D1-4
  • Spindle taper 5MT.
  • Spindle speeds (16) 45-1800 RPM.
  •   Cross slide travel 6.3".
  • Compound travel 3.8".
  • Lead screw pitch 8 TPI.
  • Quill diameter 1.8".
  • Quill center 3MT.
  • Quill travel 5".
  • Dimensions 72.25" x 31.5 x 56".
  • Weight 1,940LBS.
     Equipped with:
  • 6" 3-jaw chuck.
  • 8" 4-jaw chuck.
  • Steady rest.
  • Follow rest.
  • Face plate.
  • Coolant system.
  • Halogen light.
  • 4 way tool holder.
  • Full length splash guard.
  • Micro bed stop.
Special Note:
Comment:
Written By: Bill Merrigan  
*Dimensions:Available from product manager
*Weight:Please call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

A lathe is a machine tool that rotates its workpiece along a central spindle against a stationary cutting tool to both remove unwanted material and provide a better, smoother finish. The part is held between headstock and tailstock (the distance between centers) in a process called turning.  They are used in the manufacture of cylindrically shaped products.  In the case of larger pieces, steady rests may be used to support the workiece.  Workpieces are set up most commonly with 3 or 4 jaw chucks or collet chucks.  They can range from small, highly accurate tool room lathes to the large bore, large sized machinery common to the oil tool industry.