For Immediate Help Contact:
Louis Sicotte
(800) 374-5009 ext. 329
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Dan Wolters ext.376
EXF #:   TE-300008  


Model:   SET-5SA
Machine Type:  


Year of Mfg.:   2021
Condition:   Brand New w/Warranty  
Elect./Voltage:   240 or 480 V, 60 Cy, 3 Ph
List Price:   $ 15,400  
Our Price:   $ 14,600 USD    
Financing: $ 297 National Capital Leasing
Description:    (view full)

CAM-WOOD SET-5SA  Double End Trim Saw (Tenoner) 


  •  Length of cut: 12" to 60"
  • Max. width of cut: 24"
  • Max. clamping thickness: 4-1/2"
  • Saw blade dia. 8" to 12"; saw arbor dia. 1"; saw blade speed 3,400 RPM; saw head swivels  360 degrees.
  • Moulder (Shaper) spindle: 1" Dia. x 5" long; spindle speed 6,000 RPM; spindle swivels 360 degrees.
  • Vertical  travel: 17"  
  • Carriage cross travel: 24"

    Equipped with:
  • Saw motors: (2) each 2 HP motors
  • Moulder spindles: (2) each 2 HP motors
  • Out Feed Conveyor drive: 1 HP motor
  • Powered length setting: 1/2 HP

  • With the double end miter saw set-up, you can do cut-off stock faster or consider a double end miter saw combined with moulding head. It lets you cut off stock and moulding pattern in a single feed, that saves time, space, and cost.
  •  Air-operated clamp comes down holding sticks firmly in place. After work piece is clamped, table start to feed, performs trimming and shaping operations.
  • Trim saw allows to cut stock accurately with a clean cut.
  •  Moulding (Shaper) spindle mounted at the rear of saw head enables the machine to perform edge moulding after stock is cut off.
  •  The entire cutting cycle, cut-off, shaping/tenon or mortise is automatically operated at single pass of stock feeding.
  •  The table travels on a precision linear motion guide for stability.
  •  The table traverse is driven by power system, ensuring very stable, smooth workpiece feeding.
  •  Variable feed speed permits proper feed selection for hard or soft wood materials.
  •  Big hand wheel adjusts depth of cut.
  •  All controls are grouped in a control panel.
  •  Industrial motors for optimal cutting results.
  • Material transport thru machine powered by variable speed inverter drive for 10 to 20 seconds per cycle
    Machine Stations:
  • 1: Trim saws powered by (2) 2 HP saw arbor motors for trimming to length.
  •  2: Shaper spindles powered by (2) 2 HP spindle motors for applying tenons and grooves.
  • Floor space requirement: 94" X 40" X 54" high
  • Cycle time: 10 to 20 second per cycle

    Available option at additional cost:
  • Auto Outfeed device
  • Return conveyor
Special Note:
Written By: Louis Sicotte  
*Dimensions:96" L x 40" W x 60" H
*Weight:1,760 Lbs
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.