For Immediate Help Contact:
Joe Retzlaff
(800) 374-5009 ext. 348
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Ed Webb ext.377
EXF #:   SX-300045  


Model:   VENUS 1300 SUPER 2RK
Machine Type:  

WIDE BELT (50" - 90", 2-HEAD)

Year of Mfg.:   2021
Condition:   Brand New w/Warranty  
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
List Price:   $ 69,500  
Our Price:   $ 67,500 USD    
Financing: $ 1,357 National Capital Leasing
Description:    (view full)

EMC VENUS 1300 SUPER 2RK Finishing Sander with (2) Sanding Heads: Roller and Combination Head.

Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").
SUPER indicates longer belt length of 2,620 mm (103").

Head configuration:

1st Head:  Roller "R"  Belts dimensions: 2,620 x 1,320 mm (103" x 52"). Roller diameter: 190 mm (7-1/2"). Roller rubber hardness 85 Shore. On/off selector pneumatically operated. "Grit-set system" for grit compensation. Constant control to any position with accuracy 0.02 mm. Rotation: Against feed (clockwise). Motor power: 22 kW (30 HP). Automatic star-delta starter. Rotating cutting speed: 21 m/Sec (68 FPS). Blower for the roller unit.

2nd Head: Combination Roller & Pad.  Roller diameter 142 mm (5-5/8"). Rubber covered hardness 45 Shore. Roller pressure adjustment control & "grit-set system" for grit compensation. Fine sanding pad is pneumatically controlled. Motor is shared with the above unit. Rotating cutting speed: 18 m/Sec (59 FPS).

Electronic segmented Sanding Pad "CPC" with 43 segments, each 29,7 mm wide (1-3/16"). Including On-Off Selector: Quick Change System for removable pad with felt. Rotating cutting speed 18 m/Sec (59 FPS). Abrasive belts oscillation by means of electronic photocell sensor.

Machine management system: Electronic colour 7" Touch Screen control & display. PLC with micro-processor - CP0291. Connection for USB, RS232, Ethernet 10/100/1000. Storage capacity of 100 sanding programs. Front protection IP65 against dust & moisture.

Feed system:

  • Idle table rollers support in infeed and outfeed.
  • Rubber covered presser rollers, grooved.
  • Variable feed belt speed, adjustable from 3 to 19 m/Min (9.8 - 62 FPM) Inverter Controlled.
  • Large diameter screws on machined guides with columns and pistons.
  • Automatic feed belt centering device.

    General Machine Features: 
  • Analog ammeters, for each motor, on main control cabinet.
  • Electronic motorized grit set system, control from touch screen for each head.

    Electronical Panel: 
  •  Check Control Self Diagnostics with Alarm Control. 
  •  Analog Ammeters, for each motor, on the main control cabinet. 
  •  Electronic raising and lowering of the table, thickness system, electronically controlled. 
  •  Independent Overload protection.

  •  Infeed front emergency swinging bar for oversized panels. 
  •  Infeed protection pressing blade to avoid pieces to go back to operator. 
  •  Rear and front emergency push buttons. 
  •  Automatic brake on abrasive belts motors. 
  •  Automatic emergency stop and alarm display in case of:
  •  Low Air Pressure. 
  •  Doors opened  ("easy maintenance and inspection").
  •  Electric motors overloading. Emergency detector for over thickness material cut.
  • No tension on abrasive belt. 
  •  Abrasive belt lateral mistracking. 
  •  Abrasive belt broken.

  • Idle table rollers support in infeed and outfeed

  • Selector Switches on both working units.

    Centralized Control Cabinet:   IP 54 protection. Analog ammeter on main control cabinet. Table lifting-lowering thickness system electrically controlled. AUTOMATIC Delta - Star starter on abrasive belts motors.
    Centralized independent pneumatic control cabinet: IP 54 protection. Pneumatic air filter with automatic water-drain system. Pneumatic adjustment for "Grit set system". Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI)
    Options Available:  
  • Vacuum table for small pieces, with 4 kW (5,5 HP) fan, please add.... $4,250
  • TAMPICO Brush, natural fiber brush for cleaning of the pieces, diameter 150 mm (6").  Motor Power 1.1 kW (1.5 HP), please add.... $3,950
Special Note:
Written By: Rob Verboom  
*Dimensions:73" L x 75" W x 94" H
*Weight:5,402 Lbs
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.