Description:
(view full)
EMC FLEXY 1350 2RF Finishing Sander with (2) Sanding Heads, Roller and Superfinishing Pad
Useful working width 1,350 mm (53"). Working thickness min./max. 3 - 180 mm (1/8" - 7-1/16").
Head configuration:
1st Head: Roller "R" Belts dimensions: 2,620 x 1,370 mm (103" x 54").
- Roller diameter: 250 mm (10").
- Roller rubber hardness 85 Shore. Constant control to any position with accuracy 0.02 mm.
- Electronic motorized roller pressure adjustment "grit-set system".
- Rotation: Against feed (clockwise).
- Motor power: 11 kW (15 HP). Automatic star-delta starter.
- Abrasive belt cutting speed: 18 m/Sec (59 FPS). Oscillating abrasive belt blower for the roller unit.
2nd Head: Super Finishing Pad "F" Electronic PAD segmented in (50) sections. - Belts dimensions: 2.620 x 1.370 mm (103" x 54").
- Width of the segmented element (section): 27.0 mm (1.06").
- Rotation: Against feed (clockwise).
- Timed oscillating abrasive belt blower.
- Motor power: 11 kW (15 HP) with electronic inverter variable abrasive belt speed 3 to 18 m/Sec (9.8 - 59 FPS).
Feed system:
Constant pass line, 900 mm (35.4") from floor
● Idle table rollers support in infeed and outfeed
● Rubber covered presser rollers, grooved
● Variable feed belt speed, adjustable from 3 to 18 m/Min (9.8 - 59 FPM) Inverter Controlled
● Large diameter screws on machined guides with columns and pistons
● Automatic feed belt centering device
General Machine Features: - Independent main motors.
- Analog ammeters, for each motor, on main control cabinet.
- Electronic motorized "grit set" system; control from touch screen for each working group (head).
Electronic programmable color TOUCH SCREEN display, 10" wide
● PLC with micro-processor of latest generation, modular and expandable
● Connection USB, RS232, Ethernet 10/100/1000
● Memory capacity: 100 working programs or more
● Graphic synoptic to facilitate programming
Software facilities:
- Automatic motor sequence starting.
- Command, programming and display for all electronic pad functions.
- Command programming and display for thickness, for feeding, for all inverters and for selected groups (heads).
- Command programming and display for blowers, including compressed air saving function.
- Display report and reset of alarms (self diagnostic) with memory records.
OPTIONS INCLUDED:
Vacuum bed, 4 kW Vacuum unit for holddown of smaller parts, mounted inside of the machine base.
Centralized Control Cabinet: IP 54 protection against dust & moisture. Analog ammeter on main control cabinet. Table lifting-lowering thickness system electrically controlled. AUTOMATIC Delta - Star starter on abrasive belt motors.
Centralized Independent Pneumatic Control Cabinet: IP 54 protection. Pneumatic air filter with automatic water-drain system. Pneumatic adjustment for "Grit set system". Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI)
Options Available: Tampico Brush natural fiber brush for cleaning of the pieces, diam. 150 mm (6"). Motor Power 1.1 kW (1.5 HP), please add ...$3,950
|