HOME > SANDERS-PROFILE & MOULD. > SP-300008 > RETURN

LASM LS-3NSS EDGE SANDER



For Immediate Help Contact:
Steve Coffee
(800) 374-5009 ext. 471
Intl. +1 (704) 841-2001
Steve.Coffee@exfactory.com
If not available, try his/her backup:
Dan Wolters ext.376
dan.wolters@exfactory.com
}
Brand:  

LASM

Model:   LS-3NSS
Category:  

SANDERS-PROFILE & MOULD.

Machine Type:  

EDGE SANDER

Year of Mfg.:   2023
Condition:   Brand New w/Warranty  
Elect./Voltage:   220 V, 60 Cy, 3 Ph.
EXF #:   SP-300008
List Price:   $ 95,000  
Our Price:   $ 88,000 USD     (Convert)
Financing: $ 1,759 National Capital Leasing
Description:    (view full)

LASM VOLPATO LS-3 NSS Feed Through Top and Bottom Molding Sander with (1) Edge Sander and Inverter Controlled Belts

Molding sander with (2) opposing abrasive belt units with Inverter control on both sanding heads. The profile sander comes with an extension table to support large panels. The regulation of the axis and inclination is manual by an appropriate spanner. Dust hoods, spanner and instructions book come with the machine.

Upper and Lower Sanding Units 

  •  Inverter Controlled Motor for FLAT sanding belt, mounted on the exit column of the machine. Speed of the abrasive speed adjustable up to 14 Mt/sec. (2,755 FPM). 
  • Pneumatic tension of the abrasive belt. 
  • Timer for "jump" action on the pad. 
  • Mechanical oscillation. 
  • Air blowing system to clean and cool the belt, connected with the timer of the pad. 
  • Articulation of the unit Abrasive belt: 25°  
  • Belt dimensions: 120 x 2060 mm (4-3/4" x 81") mm. 
  • Dust hood: 100 mm (4").

    Shaped Sanding Belt Unit
  • Inverter Controlled Motor.
  • Speed of the abrasive belt: up to 14 Mt/sec (2,755 FPM).
  • Pneumatic tension of the abrasive belt.
  • Timer for "jump" action on the pad.
  • Mechanical oscillation.
  • Air blowing system to clean and cool the belt, connected with the timer of the pad.
  • Articulation of the unit Abrasive belt: 135°
  • Belt dimensions: 80 x 2450 (3-1/8" x 96") mm.
  • Dust hood: 100 mm (4").

    Transport Feed Belt
  • Variable Speed from 5 - 25 Mt/min. 

    Options to Include:
  •  Variable Speed by inverter for each sanding belt. 
  •  Abrasive belt increase to 120 mm (4-3/4"). 
  • Steel sanding block with air cushion. 
     
Special Note:
Comment:
Written By: Mark Joel  
*Dimensions:Available from product manager
*Weight:Please call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.