Description:
(view full)
TRS-460M4 MOVEABLE MULTIPLE RIPSAW WITH OPTIMIZING, (4) SHIFTING BLADES
● WITH 18" OF USEABLE ARBOR SPACE!
Specifications:
- Moveable sawblades when using the Optimization program.1-1/2” minimum distance between movable sawblades
- Sawblade configuration with (4) movable saws and (1) fixed sawblade
- Sawblades are optional
- Infeed & outfeed roller tables are optional
- With 50 HP saw arbor drive motor and 3 HP feed motor
- Pressure rollers elevation motor: 1/2HP
- (4) 1 HP servo motors for shifting sawblades
- Fence adjustment is manual.
- (4) 0.13 HP servo motors for shifting Laser Lights
- With (5) Laser Lights
- UL electrical components.
- 10 to 130 FPM variable feed speed
- 18” Max. distance between fixed saw and the last (outside) movable saw
- 31” Max. material feeding width
- 27” Min. cutting length
- (2) 6” Dust hoods
- Cutting depths: 10" blade, 1.65” thick ; 12” blade, 2.65” thick; 14", 3.66” thick; 16" blade, 4.64” thick
- Sawblade size vs. RPM. Make Blade size clear when order)
- Spindle speed @: 3,800 RPM (10" & 12"sawblade) / 3,000 RPM (14" & 16"sawblade)
Computerized Rip Optimizing Program, Included:
- The operator only sets a line for total width, then the computer performs optimized ripping according to sizes set on the job sheet and the priority mode set from these options:
- 1. Priority according to widest
- 2. Priority according to same size
- 3. Fixed width ripping
- 4. Yield priority
- 5. Value priority
OPTIONAL MODEL TRS-460M4-INCOV 3500mm AUTOMATIC INFEED CONVEYOR SYSTEM WITH SCANNER AND OPTIMIZING SYSTEM, add $183800
- Automated infeed system, speed rate controlled by electrical clutch connected with the Ripsaw's feed chain
- 13' max. infeed length with (16) width detectors (scans every 8")
- Special pressure roller set, motion with liner rail and air cylinder
- Width scanning by sensors, with optimizing program for auto calculating
- Moving fence by servo motor, according to the wood width
|