Description:
(view full)
MATH-EX OPTI-FEED 216 2-Man Marking Station:
2-Man marking station; fit's most Optimizing Saws.
Specifications:
- Handles boards from 30" to 16' long x 1-1/2" to 12" wide x 1/2" to 2" thick.
- Overall machine is 16' long x 40" wide with a 34" to 36" adjustable pass line.
Equipped with: - 12" Long x 4-1/2" dia steel smooth face rollers on approximately 10" centers; 12" wide x 3/16" thick steel table areas;
- 2-1/2" Dia idler rollers in the table ends; 3-axes adjustable, impact-resistant 12" x 18" mirrors.
Operation is as follows: - Two Graders, facing each other, pull lumber from an adjacent unit and crayon mark defects. After each board is graded, the Grader pushes it onto a table area. Adjustable, impact-resistant mirrors are attached to the frame to allow the Grader to view the bottom of the board for defects, eliminating the need to turn/flip the lumber. An idler roll at the far end of each table assists the Grader as he pulls material from the unit.
- A powered, canted roll conveyor is located between the marking tables. Canted rolls keep marked boards against the fence side of the line for proper positioning thru the camera section.
- As Graders finish marking, they nudge the board onto the roll section, ensuring an adequate board in the process. A variable speed drive powers the rolls at speeds appropriate to the saw's processing ability or to match other production requirements.
|