HOME > DUST COLLECTOR UNDER 20HP > DC-011307 > RETURN

ACT 3-12 CARTRIDGE DUST COLLECTOR


For Immediate Help Contact:
Bernie Straple
(800) 374-5009 ext. 339
Intl. +1 (704) 841-2001
Bernie.Straple@exfactory.com
If not available, try his/her backup:
Tony Cornacchione ext.432
TCorn@exfactory.com
}
Brand:  

ACT

Model:   3-12
Category:  

DUST COLLECTOR UNDER 20HP

Machine Type:  

CARTRIDGE DUST COLLECTOR

Year of Mfg.:   2023
Condition:   Brand New w/Warranty  
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
EXF #:   DC-011307
List Price:   Please call  
Our Price:   Request Quote    
Description:    (view full)

ACT 3-12 Cartridge Dust Collector

Cartridge style downflow dust collector rated at 5,800 CFM. Heavy-duty with 7 and 10 gauge construction. 

Specifications:

  • Blower, 15 HP rated at 5,800 CFM.
  • (12) Nano Elite, MERV 15, cartridge filters with 3,046 sq. ft. of filter media that are 99.9% efficient.
  • Reverse pulse filter cleaning system.
  • Pulse control timer board with built-in digital pressure gauge.
  • Drum lid with quick-lock easy-access filter doors.
  • Magnetic motor starter and disconnect.
  •  16" inlet

    Equipped with:
  • TCBI 15 HP Blower with direct drive, top mount.
  • Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (6) pulse valves. Goyen solenoids and diaphragm.
  • Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. 
  • Drum Lid Latch Ring 

  •  10 year workmanship and materials warranty 
  • Made in the USA

     
Special Note:
Comment: {5,800 CFM, 15 HP} Made to order in the USA!
Written By: Bernie Straple  
*Dimensions:87" L x 40" W x 146" H
*Weight:2,650 Lbs
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Dust collectors are pieces of equipment used in factories, plants, and warehouses to manage air pollution to maintain environmental safety requirements. Type of pollutants can differ, therefore dust collectors are designed specific to the hazardous particles dispersed. Shaker dust collectors function through a shake cleaning baghouse system, either cleaning off-line when the airflow is temporarily halted or sections the baghouse into compartments. Compartmentalized designs offer continuous cleaning of the unit while allowing for the individual compartments to be taken offline for servicing. Shaker dust collectors are common where it is impractical to supply compressed air for bag cleaning, such as foundries, steel mills, power plants, smelting plants, and mining plants. Pulse-jet dust collectors have a bag cleaning system operated via a rapid, high pressure air jet cleaner that sends a blast or shock of air through the bag that shatters and discharges the dust cake for disposal. Pulse-jet dust collectors are most useful in environments where bulk solids are processed, including chemical/mineral production, food processing plants, and metal fabrication. Cartridge collectors have a fabric filter that is designed for specific applications. Is smaller; however, provides the same airflow and purification, requiring less filters than a larger baghouse system. Cyclone dust collectors purify air by separate dust from a gas stream through centrifugal force, removing heavier/oversized particles mixed with dust. These dust collectors are typically used as “pre-cleaners” before bag houses, often being used in woodworking, pulp/paper manufacturing, shot blasting, mills, grain/agriculture, and recycling plants. Electrostatic precipitators separate soot, ash, and dust from exhaust gasses using static electricity by negatively charging airborne particles while they flow through an ionized field between the electrodes. Electrostatic precipitators are often used to purify industrial power plants managing fossil fuels, oil, and coal.