For Immediate Help Contact:
Louis Sicotte
(800) 374-5009 ext. 329
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Joe Retzlaff ext.348


Model:   BR-2096X


Machine Type:  


Year of Mfg.:   2023
Condition:   Brand New w/Warranty  
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
EXF #:   BV-300045
List Price:   $ 29,990  
Our Price:   $ 29,600 USD     (Convert)
Financing: $ 602 National Capital Leasing
Description:    (view full)

CAM-WOOD BR-2096 Double End Boring Machine


  • The machine is constructed of two opposed horizontal boring units.
  • The boring unit can accommodate multiple spindles or multiple drill heads in case less than 2" spacing is required
  • (5) Spindles are standard on each boring unit; with pneumatically / hydraulically controlled in/out stroke.
  • Multiple spindle boring blocks (heads) are optional and available.
  • The spacing of the spindles can quickly be adjusted horizontally for the required hole pattern
  • Heavy cast iron base and table assure long life usage.

  • (2) Drive motors, 3 HP - 3,400 RPM each
  • (10) Spindles, 2" in dia. and with 1/2" chuck capacity
  • Horizontal Spindle or Boring Head stroke up to 4"
  • Maximum working length 96"
  • Minimum working length 16" (could be larger due to bit length)
  • Table width (each side): 10"
  • (3+3) Pneumatic hold-down

    NOTE: The Boring Units can be "swiveled", making the machine suitable for boring panels on the right, left and front side, or bevel for boring at desired angles. 
Special Note: Brand New
Comment: Sturdy built for repetitive boring pattern at production speed!
Written By: Louis Sicotte  
*Dimensions:Available from product manager
*Weight:Please call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

A boring machine is a device used to produce or enlarge (existing) holes in a workpiece. Boring machines have a cutting tip that can be made of steel, cemented carbide, and small grinding wheels (possibly made of minerals like diamonds). Single point tools are controlled by adjusting the boring head, moving circularly to create/enlarge holes and sweep debris from bored areas of the workpiece. Grinding wheel cutters have planetary/orbital motions, rotating rapidly around its axis. The hole diameter is controlled by adjusting the distance between the wheel axis and spindle axis. Spindles and a spindle axis are axes that rotate either vertically or horizontally on a boring machine. Vertical boring mills are used to rotate a workpiece around a vertical axis, while the boring bar and boring head moves in a linear motion. Horizontal boring mills are used to rotate the boring bar around a horizontal axis to bore holes in a workpiece while it’s held stationary on a table.