HOME > BORING MISC. - VERT./HOR. > BV-300037 > RETURN

KREG DK 1100 TP BORING (POCKET HOLES)


For Immediate Help Contact:
Louis Sicotte
(800) 374-5009 ext. 329
Intl. +1 (704) 841-2001
louis.sicotte@exfactory.com
If not available, try his/her backup:
Joe Retzlaff ext.348
joe.retzlaff@exfactory.com
Brand:  

KREG

Model:   DK 1100 TP
Category:  

BORING MISC. - VERT./HOR.

Machine Type:  

BORING (POCKET HOLES)

Year of Mfg.:   2023
Condition:   Brand New w/Warranty  
Elect./Voltage:   N/A
EXF #:   BV-300037
List Price:   $ 4,800  
Our Price:   $ 4,500 USD     (Convert)
Financing: $ 92 National Capital Leasing
Description:    (view full)

Pneumatic Single Spindle Tabletop continuous operation drill;

Specifications:  

  •  1.25 HP direct drive pneumatic motor; 8" tabletop working height; 1 Sec cycle time.
  • Drills the pocket hole with a 3/8" dia. step bit in (1) smooth operation; the bit is supported all the way to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent placement in virtually any material. 
  •  Capacity: Materials from 1/2"- to 1-1/2" thick.

    Features: 
  •  Pneumatic drill motor, pneumatic clamping. 
  • 15° Boring angle for greater stability, reduced screw breakout & splitting; this produces a smaller "flat-bottom" pocket hole with rounded sides that can be plugged with a dowel if desired.

    Includes:
  •  External regulator, filter & lubricator, 3/8" cobalt drill bit, and foot pedal actuation.

    Requires a compressor able to produce 8 CFM at 120 PSI (50% duty cycle).
     
Special Note:
Comment: Brand Spanking NEW!
Written By: Jim Owen  
*Dimensions:24" L x 24" W x 19" H
*Weight:77 Lbs
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

A boring machine is a device used to produce or enlarge (existing) holes in a workpiece. Boring machines have a cutting tip that can be made of steel, cemented carbide, and small grinding wheels (possibly made of minerals like diamonds). Single point tools are controlled by adjusting the boring head, moving circularly to create/enlarge holes and sweep debris from bored areas of the workpiece. Grinding wheel cutters have planetary/orbital motions, rotating rapidly around its axis. The hole diameter is controlled by adjusting the distance between the wheel axis and spindle axis. Spindles and a spindle axis are axes that rotate either vertically or horizontally on a boring machine. Vertical boring mills are used to rotate a workpiece around a vertical axis, while the boring bar and boring head moves in a linear motion. Horizontal boring mills are used to rotate the boring bar around a horizontal axis to bore holes in a workpiece while it’s held stationary on a table.