For Immediate Help Contact:
Louis Sicotte
(800) 374-5009 ext. 329
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Joe Retzlaff ext.348


Model:   DP-2015FX


Machine Type:  


Year of Mfg.:   2023
Condition:   Brand New w/Warranty  
Elect./Voltage:   120 V, 60 Cy, 1 Ph.
EXF #:   BV-300016
List Price:   $ 769  
Our Price:   $ 759 USD     (Convert)
Description:    (view full)

CAM-WOOD DP-2015F Drill Press

22" Floor model Drill Press with a durable cast iron head, table and base.

Equipped with: 

  • 2 HP 18 ~ 3240 RPM motor drives (12) different speeds making it suitable for heavy industrial use.
  • The spindle is equipped with a heavy duty 1/2" ~ 1/2" drill chuck on a #4 Morse taper.
  • Spindle stroke 4 3/4" 
  • Large 18-3/8" x 16-1/8" table with clamping slots.
  • Rack and pinion system makes it easy to adjust the table up and down.
Special Note:
Comment: A big floor model Drill Press with a 22" swing!
Written By: Louis Sicotte  
*Dimensions:Available from product manager
*Weight:Please call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

A boring machine is a device used to produce or enlarge (existing) holes in a workpiece. Boring machines have a cutting tip that can be made of steel, cemented carbide, and small grinding wheels (possibly made of minerals like diamonds). Single point tools are controlled by adjusting the boring head, moving circularly to create/enlarge holes and sweep debris from bored areas of the workpiece. Grinding wheel cutters have planetary/orbital motions, rotating rapidly around its axis. The hole diameter is controlled by adjusting the distance between the wheel axis and spindle axis. Spindles and a spindle axis are axes that rotate either vertically or horizontally on a boring machine. Vertical boring mills are used to rotate a workpiece around a vertical axis, while the boring bar and boring head moves in a linear motion. Horizontal boring mills are used to rotate the boring bar around a horizontal axis to bore holes in a workpiece while it’s held stationary on a table.