You are not logged in.    Login  |  Register  |  Help

For Immediate Answers Contact:
Jeff Terrill
(800) 374-5009 ext. 349
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Joe Retzlaff at ext ...348

EXF #: RG-300022


Machine Type:


Condition: Brand New w/Warranty
Elect./Voltage: 230 or 460 V, 60 Cy, 3 Ph
List Price: $ 95,000
Our Price: $ 83,700 USD     (Convert)
Financing: $ 1,673 National Capital Leasing
CAM-WOOD MRS-340-1M Dipchain Gang Ripsaw with one Shifting Blade:


  • Cutting width up to 13”; machine will pass thru 25-1/2”
  • 2” Maximum depth of cut with 12” diameter blades. - Will cut 4” thick with 14” blades (optional).
  • With 70 mm saw spindle; accepts 90mm bore sawblades
  • With spring-loaded pressure rolls, standard fence and feed chain.
  • With (1) powered moveable blade and fixed blades.
  • Moveable blade controlled with a joystick.
  • Shifting blade moves at 20 to 80 mm/second (up to 3” per second).
  • Moveable saw blade traverses from 0.59" thru 13.38"
  • 50 HP Saw arbor motor;
  • 3 HP Feed motor with feed speeds from 15 to 130 FPM
  • (2) 1/2 HP Lift motors for pressure rolls and saw arbor

  • (2) 30mW red Laser Lights with mounting system,
  • Pressure Plate for 12” sawblades,
  • fixed saw collar for stationary blade, 
  • (2) 12” dia x 90 mm bore carbide tipped sawblades.

    Optional Equipment when ordered with the machine:
  • TRS-FT AUTOMATIC INFEED CONVEOR SYSTEM, with Movable Fence with Digital Display and Shifting Laser Light for Rip Width Setting: ...$20,700
  • Hydraulic Quick Lock Spindle Assembly.  The hydraulic locking spindle assembly is designed to provide for quick change over between various ripping requirements.

    Simply turn the locking knob to pressurize the arbor and lock the blades in position. Turn it in the opposite direction to unlock the blades. The sawblades are mounted to solid steel blade collars: ...$ 5,850
  • Additional Quick Set Mechanically-Locked Saw Collars mounted for fast accurate sure holding of saw blades in any stationary position ...$ 190.00 ea
  • 60 HP Saw Arbor Motor:  $ 2,460
  • Additional 30 mW Laser Unit with Bracket & Wiring: ...$ 950

  • Pneumatic Pressure to Hold Down Feed Rollers (In lieu of spring pressure). Provides better control of the product being fed. Each pressure roll is controlled by an individual pressure regulator: ...$ 2,790
  • Short stock feeding device for 14” blades (see specifications for cutting capacity information): ...$ 680
  • Feed Chain with Easily Replaceable Bolt in Cast Iron Pads. Allows for changing chain pads as they wear or get cut in to rather than replacing the complete chain assembly. NOTE: Specially ground down to 0.06” square tip for optimum hold with virtually no marking: ...$ 1,830
  • Feed Chain with Easily Replaceable Urethane Non Mark Strip Inserts. Urethane is vulcanized to metal backing bars and bolted in place: ...$ 2,790
  • 14" Dia. carbide tipped ripsaw blades: ...$185 each

    NOTE: Foot Pedal seen in the photo is only used with a powered Infeed Table and designed to release boards from the Feed Table.

Comments: Great edging Saw and so is the price!
*Dimensions 80" L x 64" W x 82" H
*Weight: 5,500 Lbs
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
Terms & Conditions AMEX