You are not logged in.    Login  |  Register  |  Help

Additional Photos
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Jeff Terrill
(800) 374-5009 ext. 349
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Joe Retzlaff at ext ...348

EXF #: RG-300012


Machine Type:


Condition: Brand New w/Warranty
Elect./Voltage: 230 V, 60 Cy, 3 Ph.
List Price: $ 65,000
Our Price: Please Call     (Convert)
Financing: National Capital Leasing
CANTEK-LEADERMAC SYC 300M Heavy Duty Roll Feed Ripsaw:

Features & General Description:

  • Cast Iron base with easily accessed Anchor Bolts; lift up sound enclosure with light for quieter and safer operation; Hydro-Loc Outboard Bearing System for best gang sawing shaft support, includes grease gun; HD Cardan shaft feed (chainless) drive throughout.
  • (6) Full width, close coupled driven top feed rollers; (4) full width driven bed rollers; top rolls are air tensioned; variable pressure controls on top feed rolls; motorized lift to top rolls; infeed table is hard chromed with approx. 0.012” - 0.014” chrome.
  • Easily adjusted roll holdover on the infeed table; saw spindle has motorized lift and lowering; multiple HD V-belt driven saw spindle with special HD belt tensioner; saw blades cut from below, hence better dust removal and a heavier sturdier design.
  • Saws are pre-mounted on a slip-on sleeve for quick change; (3) sets of anti-kickback devices included; central lube system; pneumatic pressure controller safety switch – if air pressure to the top rolls drops below the set to run level, the feed will automatically stop.
  • Controls include: VFD Control to feed speeds and Digital Speed Readout in FPM or MPM; TECO-WESTINGHOUSE main electric motor; I.E.C. – TELEMECANIQUE-SQUARE-D Electricals meet or exceed UL/CSA Standards.
  • Machine is equipped with WYE-DELTA Soft-Start (low Amperage) starters & main disconnect, multiple “E-Stops" operate at low amperage

  • Max. thickness, 5.1” (130 mm); Note – to 4-1/2” with std. 14” diameter blades; to 5.1” with optional 16” Blades.
  • Saw sleeve usable length of 12.3” (312 mm) - max. dist. between outside saws; minimum length material, 10” (250 mm) – at slower speeds.
  • Saw Blades with 10” min. to 14” max dia. x 70 mm Bore (double key), 16” (400 mm) optional – no charge; Saw spindle with 50 mm dia. runs at 3,200 RPM; Saw sleeve – included, 70 mm OD with double keyways. - Includes (1) set of spacers.
  • Main Motor – 75 HP (50, 60, or 100 HP optional); top feed rolls – rise & fall, 1 HP; Feed Drive of 7.5 HP with VFD infinitely variable speed control, 20 to 165 FPM (6 to 50 MPM) to 200 FPM – 60 MPM – optional).
  • (4) 150 mm Dust collection outlets; approx. weight – net, 5,060 Lbs.; WYE-DELTA – low Amperage - Soft Start for main motor starter; electrics to UL/CSA Standards and wired to 230/460 or 575/3/60. - Note: Stock machines are with 50 HP – 460/3/60 electrics machine and can be easily and inexpensively transformed to other voltages.

    Optional Extras.
  • 75 KVA Auto Transformer to run machine on 230/3/60 electrics, please add ...$ 2,045.
  • 16” (400 mm) Dia. blade with 5.1” max. Thickness N/C; NOTE: – Contact us to see if stock machine has this capacity.
  • Extra Saw Sleeve, add ...$ 995.
  • Additional Sets of spacers for saw sleeve, P.O.R.
  • 20 MW Laser & Laser Holder w/12” Bolt on Base Stand, add ...$ 520.
  • As above but w/12” Magnetic Base Stand in lieu of bolt on base, add ...$ 28.
  • NEW Option: Single blade mechanical Quick Lock Collars that can be used on the 70 mm sleeve for individual blade quick setting and locking process (no spacers required). – This is desirable, especially if you have to quick change from size to size and you don’t have the spacers to run a special size of product; add ...$ 190 for each.

    Options Available when ordered from the Factory.
  • Feed Speeds to 200 FPM (60 MPM) with 15 HP VFD incl. heavier drive & heavier gearboxes, POR.
  • Feed Speeds to 200 FPM (60 MPM) with 10 HP VFD incl. heavier drive & heavier gearboxes (suggested for 75 HP or 100 HP main motor application), POR.
  • NOTE: VFD’s can be tweaked to even higher speeds, if desired, as equipped with extra HD Gearboxes and drives as well.
  • 60 HP Main Saw Arbor motor with WYE-DELTA Soft-Start in lieu of standard 75 HP, POR.
  •  50 HP Main Saw Arbor motor with WYE-DELTA Soft-Start in lieu of standard 75 HP, POR.
  • 100 HP Main Saw Arbor motor with WYE-DELTA Soft-Start in lieu of standard 75 HP, POR.
Comments: The CANTEK "SYC 300" is a Roll Feed Gang Rip Saw with "many options"!
*Dimensions Available From Product Manager
*Weight: Please Call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
Terms & Conditions AMEX