You are not logged in.    Login  |  Register  |  Help
 
 



Additional Photos
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Bob Bogart
 
(800) 374-5009 ext. 335
Intl. +1 (704) 841-2001
bbogart@exfactory.com





If not available, try his/her backup:
Bill Merrigan at ext ...444
bill.merrigan@exfactory.com





EXF #: PQ-300004
Brand/Model:

CARELL / SIMASV T22 DIGIT

Machine Type:

HORIZONTAL PRESS

Condition: Brand New w/Warranty
Elect./Voltage:
List Price: $ 24,635
Our Price: $ 24,635
Financing: $ 501 National Capital Leasing
Questions:
For Instant Communication, Click Here
 
Description:
CARELL/SIMASV T22 DIGIT COOL Horizontal Press 
The T22 DIGIT Full hydraulic horizontal press has been designed to execute bends, press form, folds, crimps, stamping and shaping of many material types from flat, square, round, tubular and special shapes. The unit can also be fitted with tooling to scroll bend flat or square bar, to compression bend or rotary bend tubing, to shear bar and plate, to hot form, to punch and perform many varied operations rapidly and efficiently.
       The unit work surface is clear since the hydraulic cylinder and other machine components are mounted below the work bed. Only the stationary and mobile shafts which receive tooling are visible. Quality bends are produced swiftly and efficiently with minimal set up time and with low maintenance.   



  • Surface dimensions 24" x 43" . 
  • Hydraulic pressure 2800 psi Max.
  • Working height 37.5".
  • Max. punch force 24 U.S. tons.
  • Punch stroke 7.87".  
  • Punch/Die shaft 2.16" dia.
  • Motor power 2.2 HP.  
  • Oil capacity 12 gallons.
  • Advance speed 1.1 inches/sec.     
  • Working speed 0.2 inches/ sec.    
  • Machine dims. 25" x 45" x 41" Ht.
  • Machine weight 2090 LBS.
     
    FEATURES
  • Work bed is stress relieved alloy, tempered and ground smooth, lubrication channels are machined into the bed
  • Automatic operation with foot pedal control to activate stroke
  • Punch stroke control via micro-metric limits
  • Quick change tooling with many options for work types
  • Hydraulic power unit equipped with TEFC motor, pump, relief valves and pilot non return valves. Power unit is integral to the machine frame. 
  •  Lubrication:  forced centralized lubrication system via manual pump with reservoir
  • Electrical System: NEMA type enclosure, low voltage controls, emergency stop palm
         switch, foot pedal activation, key lock out, machine mounted dual push-buttons

     
Comments:
*Dimensions Available From Product Manager
*Weight: Please Call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
Currency Exchange Terms & Conditions AMEX