You are not logged in.    Login  |  Register  |  Help

Additional Photos
We are awaiting video for this item from the principals. We are awaiting literature from the principals.

For Immediate Answers Contact:
Dan Wolters
(800) 374-5009 ext. 376
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Tony Cornacchione at ext ...432

EXF #: FO-300001


Machine Type:


Condition: Brand New w/Warranty
Elect./Voltage: 220 V, 60 Cy, 1 Ph & 3 Ph.
List Price: $ 31,000
Our Price: $ 27,500 USD     (Convert)
Financing: $ 559 National Capital Leasing
CAL-FAB INDUSTRIES 10/8/8 Batch Oven

Walk-in "GAS Fired" Batch Oven. - Oven Inside Dimensions: 8' Wide x 8' high opening x a 10' length.

  • Outside Dimensions: 9'-4" Wide x 15' long x 10' high.
  • Max. oven temperature of 450° F. Burners are Midco International Inc. rated to 400,000 BTU.
  • Controls: Digital controllers with auto tune / ramp & soak / Bake timer with audible alarm, auto cool down and auto shut off. Nema 1 enclosure, main disconnect, plug and play simplicity

    Control panel with:
  • All UL-Listed components and devices, switches and accessories, NEMA 1 Enclosure.
  • Gas fired Oven with: Double door opening at the front, explosion-proof latch and OSHA handles.
  • The blower is rated to the capacity indicated and furnished with an enclosed TEFC motor; motor and blower are V-belt connected to the rear of the oven and protected with a fully enclosed guard.
  • The oven is designed for: Heating by air flow through the rear and circulated to the Oven by the supply air duct on bottom of both sides; design insures even heating throughout the Oven and ability to control hot spots by adjustment of the dampers so that powdered items will cure evenly throughout the Oven.
  • Up-flow return of air atop center of the oven through aligned louvers.

    Construction: Oven is built with a steel structure main frame with pre-assembled oven panels connected to it.
  • The tongue and grooved panels are insulated with 6 lb. Density insulation. Wall panels will be skinned with 20 gauge aluminized sheet steel. All interior ducts will be made of 18 gauge "aluminized" sheet steel.
  • The oven will have adjustable louvered vents down both side walls for circulation of heated air and the ability to balance the air movement. Cold air return duct is along the top to create a vertical circulation effect . The oven will have double doors on one end and each door will be 4’x8’. Doors will be made with one side latched tight and other will be equipped with a Brixon safety latch.
  • The interior structural steel will be painted with high temp aluminum paint. To match the rest of the interior
    Exterior is cleared with high tempt clear and sealant.

*Dimensions Available From Product Manager
*Weight: Please Call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
Terms & Conditions AMEX