You are not logged in.    Login  |  Register  |  Help
 
 



Additional Photos
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Jeff Terrill
 
(800) 374-5009 ext. 349
Intl. +1 (704) 841-2001
jeff.terrill@exfactory.com





If not available, try his/her backup:
Dan Wolters at ext ...376
dan.wolters@exfactory.com





EXF #: FJ-300016
Brand/Model:

CAM-WOOD SFJ-530

Machine Type:

FINGER JOINT SHAPER

Condition: Brand New w/Warranty
Elect./Voltage: 240 or 480 V, 60 Cy, 3 Ph
List Price: $ 60,000
Our Price: $ 52,490
Financing: $ 1,055 National Capital Leasing
Questions:
For Instant Communication, Click Here
 
Description:
CAM-WOOD Single Shaper Finger Joint System (Complete);

System complete with (1) Shaper Station, Glue Applicator, 16' Assembly Press with Cut-Off Saw. 

CAM-WOOD SFJ-530 Finger Joint Shaper:

  • Single Fingerjoint Shaper with 8" min. and unlimited max. block length; 6" max. block thickness; 12" max. block width (horizontal joints only); 16" table working width for vertical joints.

    Equipped with:
  • Shaper spindle powered by 15 HP belt drive motor with 50 mm dia. spindle turning at 9,000 RPM; swings 6" max. dia. cutter. 
  • Trimsaw powered by 3 HP direct drive motor at 3,500 RPM and a 1" dia. saw spindle; swings 10" max. blade dia. 
  • Table cycles 2-1/2 times/Min via hydraulic system with 2 HP hydraulic power unit. Includes 5" dia. dust outlet.

    Features: 
  • Manual Fingerjointer performs end trimming and shaping functions on right and left end of blocks.
  • Air-operated clamp holding blocks firmly in place. After work piece is clamped, table feeds past the saw and shaper spindles to perform trimming and fingerjoint operations; trim saw cuts blocks exact 90 degree ends. 
  • Shaper spindle is precision-constructed for cutting fingers accurately; swings up to 6" dia. tooling. 
  • Spindle height adjustment displayed on dial readout for easy adjustment. 
  • Table travels on a precision linear guide for stability; table traverse driven by hydraulic power system smooth and accurate block feeding. 
  • Variable feed speed permits proper feed for hard or soft wood. 
  • Cast iron frame and table for durability.

    CAM-WOOD SFJ-15G Automatic Finger Joint Glue Applicator.
  • Pneumatic operation; The glue "comb" moves up and down pneumatically to bring adhesive from glue pot to the joint while ensuring an even glue spread for fast, efficient application.

    CAM-WOOD SFJ-4500A Automatic Finger Joint Assemble System.
  •  The "SFJ-4500A" is an Automatic Assembly System, Cutoff Saw, and Press. The system performs three functions;
      1)  Pre-assembles finger jointed blocks with glue previously applied in the SFJ-15G Glue Applicator,
      2)  Cuts the assembled boards to length,
      3)  Performs the final assembly when pressed by a powerful hydraulic system. When pressing is complete, boards are fed out of the Press. 

    Power feed for feeding boards, stops automatically at the desired board length using the included cut-off saw as standard equipment for cutting boards to length. The maximum assembled board length is 16'. Other sizes are available on request.

    Specifications:
  • Max. length capacity, 195"; max. width, 6"; max. thickness, 3". Feed speeds from 0 - 26 FPM;
  • Cutoff Saw runs at 3,500 RPM and is powered by a 2 HP motor; Blade dia. is 12" with a 1" arbor;
  •  1/4 HP feed motor and 5 HP hydraulic pump motor.

    Footprint is 277" long x 48" wide x 60" high and weighs 3,529 Lbs.
Comments: Best little Finger Joint System out there - Capacity & Performance!
*Dimensions Available From Product Manager
*Weight: 3,640 Lbs
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
Terms & Conditions AMEX