You are not logged in.    Login  |  Register  |  Help
 
 



Additional Photos
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Jeff Terrill
 
(800) 374-5009 ext. 349
Intl. +1 (704) 841-2001
jeff.terrill@exfactory.com





If not available, try his/her backup:
Dan Wolters at ext ...376
dan.wolters@exfactory.com





EXF #: FJ-300013
Brand/Model:

CAM-WOOD 620-UB

Machine Type:

FINGER JOINTER (HORIZONTAL JOINT)

Condition: Brand New w/Warranty
Elect./Voltage: 240 or 480 V, 60 Cy, 3 Ph
List Price: $ 300,000
Our Price: $ 225,000
Financing: $ 4,472 National Capital Leasing
Questions:
For Instant Communication, Click Here
 
Description:
CAM-WOOD MODEL 620-UB "LONG BOARD" MEDIUM PRODUCTION HORIZONTAL FINGER JOINTER:

  • Typical application is for post and beam or laminated beam operations where long lengths are required.
  • Up to 12' infeed capacity, unlimited outfeed lengths, and with the following equipment and specifications:

    CAM-WOOD MODEL HSTC-62AX2 INFEED CONVEYOR (A on Schematic)
  • infeed Table size: 24.4’ wide x 12’-4” long
  • Working dimensions: 24.4” wide x 12’-1” long
  • Feed speed: 115 FPM
  • Powered by (2) 2 HP inverter type motors 
     
    CAM-WOOD MODEL FSR-62I INVERTER TYPE SHAPER SECTION (B on Schematic)
  • Working dimensions: 24.4” wide x 6” to 12’ long x 0.06” to 4” thick
  • Shaper spindle with 20 HP motor
  • Size of cutter head: 50mm Bore x 160mm OD (1-cutterhead included)
  • Shaper spindle runs at 5,800 RPM
  • 7-1/2 HP Cut-off saw, runs at 4,800 RPM      
  • Cut-off saw blade dimensions: 10” diameter x 100 tooth (1-blade included)
  • 2 HP scoring saw, runs at 2,850 RPM 
  • Scoring saw blade dimensions: 7” diameter x 60 tooth (1-blade included)
  • Conveyer belt powered by a 2 HP
  • Table movement powered by a 2 HP motor
  • Table movement power, 2 HP motor
  • Table cycle speed, 1 to 4 cycles per minute
     
    CAM-WOOD MODEL HSTC-62AX2 OUTFEED CONVEYOR (C on Schematic)
  • Table size: 24.4’ wide x 12’-4” long
  • Working dimensions: 24.4” wide x 12’-1” long
  • Feed speed: 115 FPM
  • Powered by (2) 2 HP inverter type motors

    CAM-WOOD MODEL HSTC-62AX2 INFEED CONVEYOR (N on Schematic)
  • Table size: 24.4’ wide x 9’-8” long
  • Working dimensions: 24.4” wide x 12’-1” long
  • Feed speed: 115 FPM
  • Powered by (2) 2 HP inverter type motors

    CAM-WOOD MODEL FSL-62I INVERTER TYPE FINGER JOINT SHAPER (D on Schematic)
  • Working dimensions: 24.4” wide x 6” to 12’ long x 0.06” to 4” thick
  • Shaper spindle with 20 HP motor
  • Size of cutter head: 50mm Bore x 160mm OD (1-cutterhead included)
  • Shaper spindle runs at 5,800 RPM 
  • 7-1/2 HP Cut-off saw, runs at 4,800 RPM
  • Cut-off saw blade dimensions: 10” diameter x 100 tooth (1-blade included)
  • 2 HP scoring saw, runs at 2,850 RPM 
  • Scoring saw blade dimensions: 7” diameter x 60 tooth (1-blade included)
  • Conveyer belt powered by a 2 HP
  • Table movement powered by a 2 HP motor
  • Table movement power, 2 HP motor
  • Table cycle speed, 1 to 4 cycles per minute
  • NOTE: Glue application system provided by others such as APQUIP. Buyer to provide glue system of their choice and ship to CAM-WOOD's factory where it is mounted, aligned, and tested prior to shipment. This work is included in the price.

    CAM-WOOD MODEL HSTC-62BX2 OUTFEED CONVEYOR WITH GLUE CLEANER (E on Schematic)
  • Table size: 24.4” wide x 12.4” long                            
  • Working dimension: 24.4” wide x 12.1” long
  • Feed speed: 180 FPM
  • Feed belt motor with 2 HP motor
  • Glue cleaning device with 1/2 HP motor
  • Conveyor powered by (2) 2 HP motors        

    CAM-WOOD MODEL SCC-20 NARROW CONVEYOR TO ASSEMBLY PRESS (K on Schematic)
  • Table size: 8” wide x 14’ long
  • Speed: 230 FPM
  • Power by a 2 HP motor

    CAM-WOOD MODEL UFJ-600 INFINITE LENGTH FINGER JOINT ASSEMBLY PRESS WITH PROGRAMMABLE CUTOFF SAW (H on Schematic)
  • Working dimension; 1.38” to 8” wide x 1” to 4” high X infinite assembled length
  • Hydraulic pressure at the joint
  • In-feed speed: 98 to 164 FPM
  • Cut-off saw with 7-1/2 HP motor        
  • Cut-off saw blade dimensions: 18” dia. x 120 tooth x 1” bore. (1) Blade included 
  • Cut-off saw runs at 2,850 RPM
  • Incudes a 6-1/2’ x 10’ out-feed table
  • Hydraulic oil tank; holds 52-gallons (shipped dry)

    OPTIONAL EQUIPMENT (Applicable if higher Press Section capacity is needed)
    Model HSC-65 High Speed Pre-Joint Assembly Conveyor and Press Feeder

  • Working dimension are 1-1/2" to 8" wide x 1/2" to 4" thick x up to 21' long
  • (2) 3 HP motors to the feed chains
  • 7-1/2 HP Inverter drive to the Infeed Belt
  • Double flat top chain type 
  • Feed speed from 30 to 295 FPM 
  • Add $39,800

    Equipment Production Calculations based on the following:
  • 480 minute shift                                                                                                         
  • Finger length to buyer’s specifications but not to exceed 1-1/8” 
  • 10’ average infeed length
  • 2” x 6” average cross section
  • (2) Tables processed per minute (table speed may change according to board width and thickness)
  • Up to (4) 2” x 6” blocks per shaper table
  • Capacity of the press: continuous up to 40 FPM maximum
                                                                                                                      
    Capacity of the shaper when finger jointing 2” x 6” boards horizontally:
  • Process (2) tables per minute
  • Each table holding (3) 6" wide boards
  • 10’ Average infeed length
  • 480 Minutes per shift
  • X 0.8 Rate of utilization = 23,040 lineal feet per shift  
     
    Capacity of the press:  
  • Up to 40 FPM continuous   
  • 480 Minutes per shift
  • X 0.8 Rate of utilization = 15,360 lineal feet per shift

    With Optional Assembly and Press Feeder
  • Up to 60 FPM
  • 480 Minutes per shift
  • X 0.8 Rate of utilization = 23,040 lineal feet per shift

    Inbound wood requirements:
  • Infeed lengths from 6” to 12’ (boards should be at least 50% longer than the width)
  • Thickness from 1/2” to 3”
  • Width from 1” to 8”
  • Unlimited out-feed lengths
  • Species: Soft and hardwood
  • Moisture content: From 8 to 12% preferable
  •  For best results, inbound boards should be surfaced 4-sides.
  • Important that the bottom and both edges of boards are at 90-degrees
     
     To be provided locally:
  • Electric power supply to the provided Motor Control Center
  • Constant voltage (deviations max.: 5%)
  • 35°C Temperature range for computer control and not exceeding 35°C
  • 65% Maximum relative humidity for computer control system
  • Compressed air connection to machinery: 6~8 KG/CM2 – 8BAR
  • Hydraulic oil
  • Skilled operating and maintenance personnel
  • Noise control, if required
  • Illuminated work environment
  • Dust collection outlets: (2) each 3” diameter, (6) each 4” diameter, (2) each 5” diameter
  • Total power requirements: 81 KW or 110 HP

    NOTE: Price includes (5) days start up and training by a Factory Technician
    s
Comments: Find a new Finger Jointer with these specs for less - I dare you!!!
*Dimensions Available From Product Manager
*Weight: Please Call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
Currency Exchange Terms & Conditions AMEX