You are not logged in.    Login  |  Register  |  Help
 
 



Additional Photos
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Jeff Terrill
 
(800) 374-5009 ext. 349
Intl. +1 (704) 841-2001
jeff.terrill@exfactory.com





If not available, try his/her backup:
Dan Wolters at ext ...376
dan.wolters@exfactory.com





EXF #: FJ-300012
Brand/Model:

CAM-WOOD SFJ-3800-205-FM-FAH

Machine Type:

FINGER JOINTER (HORIZONTAL JOINT)

Condition: Brand New w/Warranty
Elect./Voltage: 230/460/575 V, 60 Cy, 3 Ph
List Price: $ 750,000
Our Price: $ 588,800
Financing: $ 11,702 National Capital Leasing
Questions:
For Instant Communication, Click Here
 
Description:
CAM-WOOD MODEL SFJ-3800-205-FM-FAH HIGH SPEED, LONG BOARD, HORIZONTAL JOINT, FINGER JOINTER:

  • Double Chain & Slat Type Shaper Section designed for long incoming boards
  • Manual infeed; Slat Bed Feed Chain runs at up to 75 FPM; lugs on 30" centers. Slat Bed powered with a 15 HP gear motor with 1:40 gear ratio.
  • Table Transfer Roll Motors, even ends boards to the Right and Left Shaper Fences: powered by (2) 7-1/2 HP motors  
  •  Power raising and lowering of the holddown assemblies on both Shaper Sections; Powered with (2) 2 HP motors
  •  (1) Pair Scoring Saws with 2 HP motors, 50mm arbor, 2,850 RPM, scoring blade size of 7” x 50 tooth, (4) Blades included
  • (1) Pair Trim Saws with 10 HP motors, 50mm arbor, 4,275 RPM, trim saw blade size of 10” x 100 tooth. (2) Blades included
  • (1) Pair Vertical Hogging Shaper Spindles with 10 HP motors, 50mm arbor, 4,375 RPM, hogging blade size of 9.4” x 50 tooth. (2) Blades included
  • (1) Pair Vertical Finish Shaper Spindles with 20 HP motors, 50mm diameter spindles, 5,300 RPM. For
  • 50mm bore x 160mm dia. cutterheads; finger length of 1.122”; cutterheads and knife profile to buyer’s specification
  • Extrusion Type Glue Application System for PVAC Glues; mounted on Right Side Shaper Section. Includes glue pump, valves, and glue injection thru the applicator comb machined to buyer's specifications.  
  • Optional APQUIP Glue System available at extra cost
  • Optional Glue Equipment available for Loctite HB X Glue at extra price
  • Deduct $5,200 if provided without a Glue System

    SCC-20 TRANSFER CONEYOR  
  • Conveyor between Shaper Section to the Press Section
  • Working dimension: from 1” to 8” wide x 12” to 12’-6” long
  • Speed 230 FPM
  • Powered by (1) 3HP
     
    HSC-65 HIGH-SPEED PRE-PRESS ASSEMBLY SECTION
  • Working dimensions: 1” to 8” wide x 3/4” to 2-1/4” high x up to 21’ long
  • (2) 5 HP motors drive the double flat top chains
  • Feed speeds from 32 to 295 FPM
  • Includes (1) 15 HP Frequency Converter to power the feed chain motors at speeds determined by incoming boards lengths
     
    NFJ-1500 50’ HEAVY DUTY AUTOMATIC ASSEMBLY PRESS
  • Working dimension: 1” to 8” wide x 3/4” to 2-1/4” high x up to 50’ long
  • Power of upper rollers: (2) 3HP motors with a 1:10 gear ratio
  • Power of lower roller: (1) 5HP motor with a 1:10 gear ratio
  • In-feed Inverter: (1) 15HP motor
  • In-feed speed: From 32 to 295 FPM
  • Cut-off saw: With 7.5HP motor driving the arbor at 2,850 RPM
  • Sawblade: 14” diameter x 120 tooth
  • Hydraulic power to the Pressing Cylinders: (2) 20HP with high speed oil tank
  • Hydraulic pressure output: 1,700 PSI at the joint
  • Capacity (1) to (4) 50’ assembled boards per minute
  • Machine comes arranged with equipment to assemble (3) sizes of material cross sections according to buyer’s specifications for width within +/-3/16” width tolerance

    SYSTEM REQUIREMENTS FOR INCOMING BOARDS
  • Incoming lumber length: 1’ to 12.4’
  • Working thickness 3/4” to 2-1/4”
  • Working width: 1” to 8”  (+/- 3/16")
  • Glue type to be used:  PVAC
  • Species: Soft and Hardwoods
  • Moisture content: 8 to 12%
     
    REQUIRED QUALITY OF INCOMING BOARDS
  • Board length:  At least 50% longer than its width.
  • Board surface: S4S to a tolerance of ±0.2mm.  
  • Require 90degree right angle at all surfaces to edges
  • Lumber must be straight.
     
    PRODUCTION NUMBERS
  • Shaper Section:
  • Shaper runs at (30) slats per minute
  • Average board length is 6’-6”
  • Shift is 480 minutes long
  • 0.8 efficiency factor = 76,032 lineal feet per shift.
     
  • Assembly and Press Section:
  • (4) Assembled Boards per minute
  • Board length is 50’
  • Shift is 480 minutes long
  • 0.8 efficiency factor = 76,800 lineal feet per shift
  • NOTE: Actual capacity of the system depends on the length and number of boards that are fed to the Shaper Section. 
     
    TO BE PROVIDED LOCALLY
  • Total electricity demand: 180 HP
  • Electric power supply to Motor Control Center
  • Constant voltage, voltage deviations max.: 5%
  • Temperature range for computer control not to exceed 90°F
  • 65% Maximum relative humidity for system computer
  • Dust exhaust system: (V=30M/S at a low pressure of 12M BAR)
  • Compressed air requirement: 30 HP with at least a 25-gallon air receiver
  • Hydraulic oil
  • Skilled operating and maintenance personnel
  • Properly illuminated working environment
  • Dust Piping: 8” diameter

    NOTE: Price Includes Startup & Training
     
Comments: The perfect Finger Jointer for I-Beam Flanges and other long boards
*Dimensions Available From Product Manager
*Weight: Please Call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
Terms & Conditions AMEX