You are not logged in.    Login  |  Register  |  Help
 
 


For Immediate Answers Contact:
Jeff Terrill
 
(800) 374-5009 ext. 349
Intl. +1 (704) 841-2001
jeff.terrill@exfactory.com





If not available, try his/her backup:
Dan Wolters at ext ...376
dan.wolters@exfactory.com





EXF #: FJ-300011
Brand/Model:

CAM-WOOD HSTC-62A

Machine Type:

FINGER JOINTER (HIGH PRODUCTION)

Condition: Brand New w/Warranty
Elect./Voltage: 230/460/575 V, 60 Cy, 3 Ph
List Price: $ 325,000
Our Price: $ 268,400
Financing: $ 5,334 National Capital Leasing
Questions:
For Instant Communication, Click Here
 
Description:
CAM-WOOD HSTC-62 HIGH SPEED LONG BOARD VERTICAL FINGER JOINTER with the following Specifications: 

HSTC-62A  Infeed Belt Conveyor: 

  • Working dimension: 24” wide x 16’ long
  • Speed at 110 FPM
  • One 3 HP Inverter Drive Motor
     
    SHAPER #1: DFSR-62I - Left Side Heavy Duty Finger Joint Shaper
  • Working dimension: 24” wide x 1” to 10” high x 8” to 16' long
  • Scoring Saw: 2 HP motor
  • Scoring Saw Blade: 7” diameter x 50 tooth
  • Scoring Saw speed: 2,850 RPM
  • Trim Saw Spindle: 15 HP motor
  • Trim Saw Blade: 12” diameter x 80 tooth
  • Trim Saw Speed: 2,800 RPM
  • (2) Finger Joint Spindles, (1) for rough cut and (1) for finish cut, each with a 30 HP motor
  • Spindle diameter: 50 mm
  • Diameter of cutterhead possible without knives: 8-1/4”
  • Shaper Spindle speed: 3,800 RPM
  • Conveyor belt with 3 HP Inverter Drive
  • Table cycle by 3 HP Drive Motor
  • Table cycle speed from (1) to (4) cycles per minute (depends on work)

    HSTC-62A HEAVY SINGLE TABLE OUTFEED TRANSFER CONVEYOR
  • Working dimension: 24” wide X 16’ long
  • Speed at 110 FPM
  • One 3 HP Inverter Drive

    HSTC-62A SINGLE TABLE INFEED TRANSFER CONVEYOR
  • Working dimension: 24” wide X 16' long
  • Speed at 110 FPM
  • One 3 HP Inverter Drive

    SHAPER #2: DFSR-62I - RIGHT SIDE HEAVY DUTY FINGER JOINT SHAPER WITH GLUE APPLICATOR
  • Working dimension: 24” wide x 1” to 10” high x  8” to 16' long
  • Scoring Saw: 2 HP motor
  • Scoring Saw Blade: 7” diameter x 50 tooth
  • Scoring Saw speed: 2,850 RPM
  • Trim Saw Spindle: 15 HP motor
  • Trim Saw Blade: 12” diameter x 80 tooth
  • Trim Saw Speed: 2,800 RPM
  • (2) Finger Joint Spindles, (1) for rough cut and (1) for finish cut, each with a 30 HP motor
  • Spindle diameter: 50 mm
  • Diameter of cutterhead possible without knives: 8-1/4”
  • Shaper Spindle speed: 3,800 RPM
  • Conveyor belt with 3 HP Inverter Drive
  • Table cycle by 3 HP Drive Motor
  • Injection type adhesive spreader with standard glue height of 10”
  • Glue system included is for PVAC.
  • Optional APQUIP Glue System available at extra cost
  • Optional Glue Equipment available for Loctite HB X Glue at extra price
  • Deduct ...$5,200 if provided without a Glue System

    HSTC-62B OUTFEED CONVEYOR WITH BELT CLEANER
  • Working dimension 24” long X 16’ wide
  • Speed at 115 FPM
  • (1)  3 HP Inverter Drive
  • (1)  1/2 HP motor for conveyor cleaning device
     
    HSCB-62 TIPPING CONVEYOR W/NARROW CONVEYOR
  • Flips boards from vertical to horizontal for automatic feed to the Press
  • Working dimensions:
  • (1)  Conveyor at 24” wide x 16’ long
  • (1)  Conveyor at 8” wide x 16’ long
  • Speed 110 FPM
  • 3 HP Inverter Drive
     
    UFJ-600 FINGER JOINT CONTINOUS ASSEMBLY MACHINE FOR INFINITE LENGTHS
  • Working dimension 1-3/8” to 10’ wide X 1” to 4” thick by unlimited lengths
  • In-feed speed from 100 to 165 FPM
  • Cut-Off Saw:  7-1/2 HP
  • Cut-Off Saw Speed: 2,850 RPM
  • Cut-Off Saw blade dimensions: 18” diameter x 1” bore x 120 tooth carbide tipped  
  • Hydraulic Power Units: (1) @ 10HP and (1) @ 15HP
  • Hydraulic Oil Tank: 50 Gallons
  • Out-feed table: 78” Length 

    NOTE:  (5) Days start-up and training by factory technicians included in price.
     
    OPTIONAL ACCESSORIES:
  • (4) 40 HP Shaper Motors, add  ...$35,000
  • (4) 50 HP Inverter Driven Shaper Motors, add ...$40,000
  • Overhead lifting system for removing and installing cutterheads, add ...$10,800
  • Safety Fencing and electric interlocks, add ...$8,760
  • CE electric components, add ...$13,920
     
    LUMBER AND ADHESIVE SPECIFICATIONS
  • Incoming working lengths from 10” to 16’
  • Boards must be at least 50% longer than their width
  • Lumber thickness from 1” to 4”
  • Lumber width from 1-3/8” to 10”  
  • Assembled out-feed lengths are unlimited
  • Glue type to be used: PVAC.
  • Lumber species are soft and hardwoods
  • 8% to 12% Moisture content
  • Incoming boards to be planed (S4S)
     
    PRODUCTION CALCUATED ON A 480-MINUTE SHIFT
  • Finger length according to buyer's specs up to 1-1/8" long
  • 6’ Average in-feed length
  • 2” x 4”, 6”, 8” or 10" incoming boards
  • Shapers tables are capable of cycling up to 4-times per minute
  • Maximum of (16) 1-1/2” thick boards per shaper table when making vertical joints
  • Maximum of (3) 8” wide boards per shaper table when making horizontal joints
  • Lengths of assembled boards are unlimited on the Continuous Assembly Machine
  • Following production rates are calculated with an 80% utilization factor

    NOTE: Table cycle speed varies with working height, width, and weight of the boards
     
    PROCUCTION RATES when vertical finger jointing (joints seen in the face of the board):
  • (1) Cycle per minute x (16) 1-1/2" thick x 4, 6, or 8” boards per table x 6’ average block length x 480
    Minute shift x 0.8 rate of utilization = 36,864 lineal per shift
  • (3) Cycles per minute x (16) 1-1/2” thick x 4, 6, or 8” boards per table x 6’ average block length x 480
    Minute shift x 0.8 rate of utilization = 110,592 lineal per shift

    PROCUCTION RATE when horizontal finger jointing (joints seen in the edge of the board):
  • (3) Cycles per minute x (3) 8” wide boards per table x 6’ average infeed length x 480"
    Minute shift x 0.8 rate of utilization = 6,912 lineal per shift

    TO BE PROVIDED BY CUSTOMER
  • Electric power supply to Motor Control Center
  • Constant voltage (5% max. voltage deviation)
  • Temperature range for computer control not to exceeded 95° Fahrenheit
  • 65% Maximum relative humidity for computer control system
  • Dust exhaust system
  • Compressed
  • Hydraulic oil
  • Dust collection outlets: (6) at 8” dia. and (1) at 4”
  • Compressed air supply: Minimum 30 HP @ 120 PSI with a 150 gallon air receiver
Comments: Designed with American Engineering by "Quality Manufacturer"!
*Dimensions Available From Product Manager
*Weight: Please Call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
Terms & Conditions AMEX