You are not logged in.    Login  |  Register  |  Help
 
 



Additional Photos
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
David Helms
 
(800) 374-5009 ext. 303
Intl. +1 (704) 841-2001
David.Helms@exfactory.com





If not available, try his/her backup:
Karl Balg at ext ...355
Karl.balg@exfactory.com





EXF #: CC-300014
Brand/Model:

ERREGI TECNOPRESS

Machine Type:

CASE CLAMP (AUTOMATIC FEED THROUGH)

Condition: Brand New w/Warranty
Elect./Voltage: 220 V, 60 Cy, 3 Ph.
List Price: $ 100,900
Our Price: $ 94,500
Financing: $ 1,889 National Capital Leasing
Questions:
For Instant Communication, Click Here
 
Description:
ERREGI TECHNOPRESS Electro/Mechanical Automatic "Self Adjusting" Feed Through Case Clamp.

  • Specifications:
    The vertical pressing system with motors & independently controlled crossbars move according to the size of the piece to be pressed; mobile parts slide along linear bearings and guides.

  • Operating Cycle;
    Once the piece of furniture is assembled on the preparation bench the operator starts the automatic cycle and the carcass enters the machine.

    The reading devices automatically determine the length and height of the workpiece and send this information to the PLC which positions the mobile head and the conveyor and stops the carcass in position. The beam automatically move to the preset position.

    Each of the mobile heads are fitted with: (3) Horizontal pressure beams and programmable positioning moving vertically by a pneumatic system.

    The pressing table and mobile heads are diven by AC brushless motors.
  • Working Capacity:
    9.8" - 98.4" (250 - 2,500 mm) working length, 9.8" - 47.2" (250 - 1,200 mm) working height, 9.8" - 27-1/2" (250 - 700 mm) working depth/width.
  • Positioning Speed:
    32.8 - 131.3 FPM (10 - 40 MPM) Variable speed controlled by programmable inverter.
  • The belt system is positioned on either side of the machine to allow the carcass to be clamped equally well, whether it is in the center of the conveyor belt or at the sides.
  • The carcass transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt rolls driven by an inverter controlled nonsynchronous motor.
  • Machine & Operator Control:
    Automatic cycle from onboard PLC control with adjustment for clamping strength.
  • Complete with:
    98" Long powered infeed conveyor belt with alignment guideway in coated aluminum.
  • Available Option:
    Integration of a stapling robot (please call for pricing).
  • NOT included:
    Cost of installation and training (please call for pricing).
Comments: Near perfection in a FEED THROUGH CASE CLAMP with accuracy and strength to keep it all together!
*Dimensions 185" L x 60" W x 102" H
*Weight: Please Call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
Terms & Conditions AMEX