; Used TRAVAINI TRO 500S-1A VACUUM PUMP (LIQUID RING)
You are not logged in   Login  |  Register  |  Help
 

Additional Photos (Click to view Larger)

For Immediate Answers Contact:

Norm Schust
(800) 374-5009 ext. 445
Intl. +1 (704) 841-2001
norm.schust@exfactory.com

If not available, try his/her backup:
Bob Dykstra ext.378
bob.dykstra@exfactory.com
EXF #:   VP-010277  
Brand/Model:  

TRAVAINI TRO 500S-1A

Machine Type:  

VACUUM PUMP (LIQUID RING)

Year of Mfg.:   2007
Condition:   Very good condition   
Elect./Voltage:   230/460 V, 60 Cy, 3 Ph.
Value New:   $ 28,000
Price:   $ 10,500 USD    
Financing: $ 214 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)

Description:

TRAVAINI TRO 500S-1A 40 HP Liquid Ring Vacuum Pump - 3,109 Hours:

Nominal capacity 500 ACFM @ 20" HgV; max Vacuum 27" HgV.

Specifications: 

  Pump materials include cast iron housing, ductile iron impeller, and stain less steel shaft. Shaft seals are carbon face with Viton elastomers.

  40 HP, 230/460 Volt, 3-Phase, 60 Hz, TEFC monoblock assembly for direct drive, no field alignment needed.

  Sealing fluid re-circulating system includes reservoir of carbon steel with fluid level guage and drain, high-efficiency discharge separator and oversized heat exchanger.

  High temp switch to protect against over temp operation.- Complete with charge of Dynalube fluid.

  Suction line accessories include inlet check valve, vacuum guage (0 - 30" HgV), inlet filter assembly, manual unloader valve and vacuum relief valve.

  Heat exchanger is air cooler type made from aluminum and extended surface fins.

  Electrical controls include: Starter/overload reset, pump running light, hour meter, hi-temp light, and terminal blocks, all mounted in a NEMA 12 cabinet.

  The amps @ 230 Volt = 104; the amps @ 460 Volt = 52 amps.

    Special Note: SOLD
    Comment: TRAVAINI TRO 500S-1A 40 HP liquid ring vacuum pump 3,109 Hours
    Written By: Norm Schust  
    *Dimensions:84" L x 35" W x 70" H
    *Weight:2,300 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.