For Immediate Answers Contact:
(800) 374-5009 ext. 432
Intl. +1 (704) 841-2001
KUPER FW/Q 1800
CROSS FEED SPLICER
|Year of Mfg.:||1984|
|Condition:||Cleaned and checked|
|Elect./Voltage:||380/400 V, 50 Cy, 3 Ph.|
|Value New:||€ 190,000|
|Region:||EUROPE (Click for Regional Map)|
KUPER FW/Q 1800 Lengthwise (Crossfeed) with Zigzag and with PVAC glue splicer.
"Dual" gluing system, joins veneer edges passing through a "PVAC disk style" glue application zone at high speed and applies an additional zigzag glue thread for an immediate tight hold & joint; also handles rather wavy veneers.
0.4 - 2 mm (0.0156" - 0.079") Veneer thickness capacity.
Max. working width in grain direction is 1,900 mm (74.8"); min. working width of 550 mm (21.6"); width of veneer strips crosswise to the grain approx. 65 mm (2.4").
Feed speed of taping unit is 40 MPM (120 FPM); feed speed of transport belt is 25 MPM (75 FPM); working height above floor is 900 mm (35.4").
High performance hot air heating tube, glue applied in zigzag fashion via heated guide; features dual glue thread spool holder and electrically operated thread break-off roller.
Operator controls in rotating eye-level height control box, with temperature settings & thermostats; separate side mounted emergency stop button.
|Comment:||This KUPER FW/Q 1800 will be fully checked & tested before shipping!|
|Written By:||Vicente Jorge|
|*Dimensions:||Available from product manager|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.