Description:
(view full)
HYUNDAI KIA SKT-300MS CNC Turning Center
Specifications:
Swing over cross slide: 18.90"
Swing over bed way cover: 29.53"
Max. turning length: 26.77"
Max. turning diameter: 19.69"
Bar capacity: 3.54" (without existing chuck system)
Spindle nose: A2-8 direct mount
Maximum workpiece weight: 311 Lbs. chucking
Maximum workpiece Weight: 521 Lbs. center Work
Main Spindle: C-Axis:
Main spindle speeds: 20 to 3,000 RPM
Hole thru Installed chuck draw tube: 2-1/8"
Hole thru spindle shuck: 2-1/4"
Hole thru chuck actuator tube: 3-1/2"
Chuck on main spindle: 8" 3-Jaw Hydraulic,
Fine serrated master chuck jaws HS-08, 5000 RPM Max. (NO hard jaws)
Chuck on sub spindle: 8" 3-Jaw hydraulic
Fine serrated master chuck jaws HS-08, 4600 RPM Max. (NO hard jaws)
Headstock: 2-step geared drive
C Axis Dividing Capacity: 0.001°
Sub spindle: B-Axis:
Sub spindle swing over cross slide ways: 9-5/8"
Sub Spindle swing over bed way cover: 15-1/2"
Spindle nose: A2-6 direct mount
Bar work capacity: 2.56"
Sub spindle speeds: 20 to 4,000 RPM
Tool Turret:
Live tool spindle speeds: 20 to 4,000 RPM
Number of tools: 12
Tool size: 0.98" OD, 1.97" ID
Cutting capacity: 0.79" Endmill, M16 Tap
Equipped with:
Fanuc Series 21i-TB CNC control
Swing down tool setting probe
12 position Tool turret
(2) Live milling tools
(10) Assorted turret tool holders
32 MB control card
NC parameter data sheet
RS232C communications port (25 pin)
45° Slant bed frame construction
Spindle RPM and load meters
Plug-in interface for bar feed and power (NO bar feed system)
Independent adjustable chuck pressure controls with gages
Foot pedal for chuck operation
LNS link belt chip conveyor
Chip conveyor auto or manual cycle control
Chip conveyor has forward and reverse operation
Height under chip conveyor exit chute: 44"
Chip pan coolant system on wheels
Assorted manuals, tool holders, soft chuck jaws
Thru the door parts chutes (designed for but not supplied)
|