For Immediate Help Contact:
Dale Granger
(800) 374-5009 ext. 331
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Marvin Spehar ext.452


Model:   SKT-300MS
Machine Type:  


Year of Mfg.:   2006
Condition:   Very good condition   
Elect./Voltage:   240 V, 60 Cy, 3 Ph.
Value New:   $ 375,000
Price:   Please call     (Convert)
Region:   MID ATLANTIC (Click for Regional Map)
EXF #:   TQ-011225  
Description:   (view full)

HYUNDAI KIA SKT-300MS CNC 4-Axis Turning Center


  Swing over cross slide: 18.90"

  Swing over bed way cover: 29.53"

  Maximum turning length: 26.77"

  Maximum turning diameter: 19.69"

  Bar capacity: 3.54" (without existing chuck system)

  Spindle nose: A2-8 direct mount

  Max. workpiece weight chucking: 311 Lbs 

  Max. workpiece weight center work: 521 Lbs 

Main spindle C-Axis:

  Main spindle speeds: 20 to 3,000 RPM

  Hole thru installed chuck draw tube: 2-1/8"

  Hole thru spindle chuck: 2-1/4"

  Hole thru chuck actuator tube: 3-1/2"

  Chuck on main spindle: 8" (3 Jaw hydraulic)

  Model HS-08 - 5000 RPM (Fine serrated master chuck jaws, no hard jaws)

  Chuck on sub spindle: 8" (3 Jaw hydraulic)

  Main spindle 4600 RPM (Fine serrated master chuck jaws, no hard jaws)

  Headstock: 2 step geared drive

  C-Axis dividing capacity: 0.001°

Sub Spindle B-Axis:

  Sub spindle swing over cross slide ways: 9-5/8"

  Sub spindle swing over bed way cover: 15-1/2"

  Spindle nose: A2-6 direct mount

  Bar work capacity: 2.56"

  Sub spindle speeds: 20 to 4,000 RPM

Tool turret:

  Live tool spindle speeds: 20 to 4,000 RPM

  Number of tools: 12

  Tool size: 0.98" OD, 1.97" ID

  Cutting capacity: 0.79" endmill, M16 tap

Equipped with:

  Fanuc Series 21i-TB CNC control

  Swing down tool setting probe

  12 Position tool turret

  (2) Live milling tools

  (10) assorted turret tool holders

  32 MB control card

  NC parameter data sheet

  RS232C communications port (25 pin)

  110V Outlet on operators console

  45° slant bed frame construction

  Spindle RPM and load meters

  Plug-in interface for bar feed and power (no bar feed system)

  Independent adjustable chuck pressure controls with gages

  Foot pedal for chuck operation

  Chip conveyor auto or manual cycle control

  Chip conveyor forward and reverse operation

  Height under chip conveyor exit chute: 44"

  Chip pan coolant system on wheels

  Assorted manuals, tool holders, soft chuck jaws and misc.

  Designed for but not supplied: Thru the door parts chutes

    Special Note:
    Comment: A Machine like this doesn't come on the market often!
    Written By: Dale Granger  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.