HOME > TURNING MACHINERY > TQ-011187 > RETURN

BINNS & BERRY MARKIII-TB MANUAL LATHE



For Immediate Help Contact:
Marvin Spehar
(800) 374-5009 ext. 452
Intl. +1 (704) 841-2001
Marvin.Spehar@exfactory.com
If not available, try his/her backup:
Dale Granger ext.331
Dale.Granger@exfactory.com
Brand:  

BINNS & BERRY

Model:   MARKIII-TB
Machine Type:  

MANUAL LATHE

Year of Mfg.:   1968
Condition:   Good Condition   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New:   Please call
Price:   Please call     (Convert)
Region:   MIDWEST (Click for Regional Map)
EXF #:   TQ-011187  
Description:   (view full)

BINNS & BERRY MARKIII-TB 25"/46" X 109" Gap Bed Lathe

Specifications:

  
Swing over bed ways gap closed max. 25"

  Swing through the gap max. 46"

  Gap length 11.625"

  Distance between centers 120"

  Swing over cross slide max. 15"

  Spindle Bore 4.125"

  Number of spindle speeds 16

  Spindle speeds range 12-600 RPM

  Number of threads - Inch: 60

  Inch threads 1-56 TPI

  Cross feeds range 120

  Longitudinal feeds range .0005-.156 IPR

  Tailstock spindle travel 14"

  Tailstock spindle diameter 4"


  Machine dimensions approx 185" x 80" x 75"

  Machine weight approx 10,000 Lbs.


Equipped with:

  30" independent 4-jaw chuck

  Taper attachment

  Square turret tool post

  Standard threading

  7.5" traveling steady rest

  14.5" stationary steady rest

  Follow rest

  Full length coolant/chip pan
 

    Special Note:
    Comment:
    Written By: Marvin Spehar  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    A lathe is a machine tool that rotates its workpiece along a central spindle against a stationary cutting tool to both remove unwanted material and provide a better, smoother finish. The part is held between headstock and tailstock (the distance between centers) in a process called turning.  They are used in the manufacture of cylindrically shaped products.  In the case of larger pieces, steady rests may be used to support the workiece.  Workpieces are set up most commonly with 3 or 4 jaw chucks or collet chucks.  They can range from small, highly accurate tool room lathes to the large bore, large sized machinery common to the oil tool industry.