HOME > TQMANUAL LATHE > TQ-011008 > RETURN

LEBLOND REGAL 15 X 40 MANUAL LATHE



For Immediate Help Contact:
Dale Granger
(800) 374-5009 ext. 331
Intl. +1 (704) 841-2001
Dale.Granger@exfactory.com
If not available, try his/her backup:
Marvin Spehar ext.452
Marvin.Spehar@exfactory.com
Brand:  

LEBLOND

Model:   REGAL 15 X 40
Machine Type:  

MANUAL LATHE

Year of Mfg.:   1963
Condition:   Good Condition   
Elect./Voltage:   220/440 V, 60 Cy, 3 Ph.
Value New:   $ 35,000
Price:   $ 9,500 USD     (Convert)
Financing: $ 193 National Capital Leasing
Region:   NORTHEAST (Click for Regional Map)
EXF #:   TQ-011008  
Description:   (view full)

LEBLOND Regal 15 x 40 Engine Lathe 

Specifications: 


  Swing over bed 15” 

  Swing over cross slide 9"                 

  Max center distance 40″

  Spindle nose L0

  Spindle bore  1-3/8″

  Spindle speeds 45 - 1800 RPM

  Tailstock taper  3 MT

  Threads 60 changes from 2 – 112 TPI.

  Feeds 60 changes from 0.0032 – 0.104 IPR.

  Main motor 5 HP

  Weight 2,500 Lbs

  Dimensions 96" x 75" x 50"

Equipped with:

  Taper attachment

  Threading dial

  Hardways

  8" 3 jaw chuck 

  Chip pan

    Special Note:
    Comment: Might be older than you, but there is a lot it can do!
    Written By: Dale Granger  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    A lathe is a machine tool that rotates its workpiece along a central spindle against a stationary cutting tool to both remove unwanted material and provide a better, smoother finish. The part is held between headstock and tailstock (the distance between centers) in a process called turning.  They are used in the manufacture of cylindrically shaped products.  In the case of larger pieces, steady rests may be used to support the workiece.  Workpieces are set up most commonly with 3 or 4 jaw chucks or collet chucks.  They can range from small, highly accurate tool room lathes to the large bore, large sized machinery common to the oil tool industry.