HOME > TURNING MACHINERY > TQ-010905 > RETURN

TSUGAMI TMA8 CNC TURNING CENTER



For Immediate Help Contact:
Dale Granger
(800) 374-5009 ext. 331
Intl. +1 (704) 841-2001
Dale.Granger@exfactory.com
If not available, try his/her backup:
Marvin Spehar ext.452
Marvin.Spehar@exfactory.com
Brand:  

TSUGAMI

Model:   TMA8
Machine Type:  

CNC TURNING CENTER

Year of Mfg.:   2003
Condition:   Good Condition   
Elect./Voltage:  
Value New:   $ 175,000
Price:   $ 55,000 USD     (Convert)
Financing: $ 1,106 National Capital Leasing
Region:   NORTHEAST (Click for Regional Map)
EXF #:   TQ-010905  
Description:   (view full)

TSUGAMI TMA8 7-Axis CNC Mill/Turn Centers

  Chuck diameter: 8" (203mm)

  Max. machining diameter: 8.66" (220mm)

  Max. bar machining capacity: 2.55" (65mm)

  Max. machining length: 14.56" (370mm)

  X-Axis travel: 16.9" (430mm)

  Y-Axis travel: 4.72" (120mm)

  Z-Axis travel: 15.74" + 6.5" (400mm + 165mm)
Main work spindle

  C-Axis main spindle rotation: 360,000/ 0.001°

  Spindle speed range: 35 - 7000 RPM

  Spindle min. indexing angle: 0.001°

  Spindle end: 7.48" (190mm) flat
Sub spindle

  Spindle speed range 35 - 7000 RPM

  Spindle min. indexing angle: 0.001°

  Spindle chuck size: 6" (152mm)

  A-Axis sub-spindle longitudinal travel: 25.9" (660mm)

  A-Axis rapid traverse rate: 787"/ min. (20000mm/min.)

  E-Axis, sub-spindle rotation: 360,000 at 0.001°

  E-Axis cutting feed rate: 0 - 12000°/min.

  Spindle end: 5.5" (140mm) flat
Tool spindle

  Spindle Type 1 Spindle with ATC

  B-Axis, tool head positioning angle: 0 - 180 °

  Tool spindle indexing angle: 4 - Positions/ 90°

  Tool spindle speeds 80 - 6000 RPM

  Boring bar shank diameter 1.25" (32mm)

  Tool size: .78" x .78" (20mm x 20mm)

  Tool change time, tool to tool: 0.8 Seconds

  Tool storage  60 tools

  Tool shank taper KM-40
Machine dimensions

  Floor Space (not including bar feed) 138" x 84" (3500mm x 2126mm)

  Height of machine (not incl. mist collector): 88" (2250mm)

  Machine weight (not including bar feed) approx.  17600 Lbs. (8000kg)
Equipped with:

  Automatic cutting feed acceleration/deceleration

  LNS Servo S2 magazine type bar loader

  Through the tool high pressure coolant

  Chip conveyor

  Parts catcher and conveyor

  ATS Collet nose

  Rigid tapping

  Flood coolant
 

    Special Note:
    Comment:
    Written By: Bill Merrigan  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    A turning center is a CNC controlled lathe.  Like most lathes, the workpiece is held by a chuck or collet, but the movement is computer controlled to ensure higher accuracy and efficiency.  The ability to program gives turning centers more versaility and efficiency than manual tool room and engine lathes can.  Some turning centers are further augmented with twin or sub spindles and and two turrets so that a workpiece can be machined on multiple faces, providing great savings in terms of setup time and efficiency.  The work that might require multiple machines and extra setups can be done with a single machine tool.