|
|
|
|
|
|
For Immediate Help Contact: |
|
|
|
| EXF #: | TE-011517 | |||
| Brand: |
NORTH STATE |
|||
| Model: | ST-120C | |||
| Machine Type: |
SINGLE END TENONER |
|||
| Year of Mfg.: | 2006 | |||
| Condition: |
Very good condition 
|
|||
| Elect./Voltage: | 220 V, 50/60 Cy, 3 Ph. | |||
| Value New: | $ 17,500 | |||
| Price: | $ 5,800 USD | |||
| Financing: | $ 118 National Capital Leasing | ||
| Region: | MIDWEST (Click for Regional Map) | ||
|
Description:
(view full)
NORTH STATE ST-120C 5-Head Single End Tenoner
Late model 5-heads Single End Tenoner w/Sliding Table Specifications:  Maximum tenon cut: Length 120 mm (4.7"), Width: 370 mm (15.6"), Thickness: 112 mm (4.4") Maximum tenoning cutterhead size: Diam. 105 mm (4.1") Long: 120 mm (4.7") Maximum shaping cutter size: 6 3/8" Maximum saw blade diameter: 12" Spîndle diameter: Tenon: 1", coping 1 1/4", saw blade: 1" Spindle speed: Tenon, 3.400 RPM, cope: 6,000 RPM, saw: 2,800 RPM Motor HP: Saw & tenon: 3 HP, cope head: 5 HP Sliding table area: 1,280 mm X 450 mm (50.3" X 17.7") |
| Special Note: | Hard to Find |
| Comment: | Very clean machine with (5) heads! |
| Written By: |
|
| *Dimensions: | 66" L x 72" W x 45" H |
| *Weight: | 1,500 Lbs |
|
*Dimensions & Weight data are based on 3rd party information and could be incorrect;
please verify & confirm if accurate dimensions & weight are required.
|
|
|
|
|
|
|
|
NORTH STATE ST-120C 5-Head Single End Tenoner
Late model 5-heads Single End Tenoner w/Sliding Table
Specifications:
Maximum tenon cut: Length 120 mm (4.7"), Width: 370 mm (15.6"), Thickness: 112 mm (4.4")
Maximum tenoning cutterhead size: Diam. 105 mm (4.1") Long: 120 mm (4.7")
Maximum shaping cutter size: 6 3/8"
Maximum saw blade diameter: 12"
Spîndle diameter: Tenon: 1", coping 1 1/4", saw blade: 1"
Spindle speed: Tenon, 3.400 RPM, cope: 6,000 RPM, saw: 2,800 RPM
Motor HP: Saw & tenon: 3 HP, cope head: 5 HP
Sliding table area: 1,280 mm X 450 mm (50.3" X 17.7")
Late model 5-heads Single End Tenoner w/Sliding Table
Specifications:
Maximum tenon cut: Length 120 mm (4.7"), Width: 370 mm (15.6"), Thickness: 112 mm (4.4") Maximum tenoning cutterhead size: Diam. 105 mm (4.1") Long: 120 mm (4.7") Maximum shaping cutter size: 6 3/8" Maximum saw blade diameter: 12" Spîndle diameter: Tenon: 1", coping 1 1/4", saw blade: 1" Spindle speed: Tenon, 3.400 RPM, cope: 6,000 RPM, saw: 2,800 RPM Motor HP: Saw & tenon: 3 HP, cope head: 5 HP Sliding table area: 1,280 mm X 450 mm (50.3" X 17.7")
Home Office
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
