For Immediate Help Contact:
Tony Cornacchione
(800) 374-5009 ext. 432
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Joe Retzlaff ext.348
EXF #:   SX-012829  


Model:   UNISAND 135 3
Machine Type:  

WIDE BELT (50" - 90", 3-HEAD)

Year of Mfg.:   1996
Condition:   As Is Condition   
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
Value New:   $ 160,000
Price:   Please call    
Region:   EASTERN CDN (Click for Regional Map)
Description:   (view full)

D M C UNISAND 135 - 3-Head Wide Belt Veneer & Finishing Sander.

  General Data:
3-Heads, 51" (1300 mm) nominal width cap., motorized part thickness opening with LED readout, 1/8" to 4" max. - Head sequence: Cross belt, Rubber covered Drum, Pad.

  Head Configuration/Specs: 1st Head: Cross belt with 'EPICS' 44 segmented electronically controlled air platen, 2 speed abrasive belt approx. 36/72 FPM  (11/22 MPS) linear speed, driven by 19 & 24 HP motors, 6" wide x 238" (6050 mm)  long abrasive belt. Inside synchronized Chevron belt approx. 228" (5800 mm) long. Pad unit composed of pneumatic cylinders each acting on a high absorption felt strip. Working pressure controlled via control panel. Belt 'HYDRA 2' electronic controlled with oscillating blower for cleaning.

  2nd Head: Rubber-covered 45-Durometer steel roll, 9.8" (250 mm) dia. with an 18 HP 2-speed motor, 52" x 103" (4055 mm) long oscillating abrasive belt with electronic tracking, air blast abrasive belt cleaner. Belt runs at about  3550 FPM (18 M/sec) linear speed.  Adjustment and indicator of working position.

  3rd Head: Flexible Sanding Platen with 'EPICS' 44 segmented electronically controlled air platens, 3-speed motors 24 HP, 52" x 103" (4055 MM) long abrasive oscillating belt with electronic tracking, timed oscillating air blast abrasive belt cleaner. Pad unit composed of pneumatic cylinders each acting on a high absorption felt strip. Working pressure controlled vial control panel. Special rails allowing a quick change of graphite cloth on pad. Interchangeable system to modify the hardness, stiffness and profile of the contact surface.

  Controller:  DMC HYDRA 30 upgraded computer with working position display modes mounted in a separate control cabinet. Automatic thickness device reads and adjusts feet table height, motor load meters.

  Transport belt drive: Variable feed speed 16 to 82 FPM, conveyor feed drive, infeed & outfeed holddown pinch rolls on all heads, infeed hand safety stop, outfeed emergency stop,  high efficiency dust extraction and separate control console with monitor, keypad, etc.

  Comes with:  Cleaning brush head at machine discharge. Turbo cleaning blowers at machine exit for additional cleaning of sanded parts. Soundproof vacuum suction table. High pressure vacuum blower.

  This machine was used for veneer sanding.

  Actual Model is US 135 MT2- HYDRA 30 Version 2.4.

    Special Note:
    Comment: DMC among the best sanders ever made.
    Written By: Tony Cornacchione  
    *Dimensions:134" L x 144" W x 98" H
    *Weight:22,000 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.