For Immediate Help Contact:
Joe Retzlaff
(800) 374-5009 ext. 348
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Ed Webb ext.377
EXF #:   SX-012809  


Model:   LSM 8
Machine Type:  

WIDE BELT (50" - 90", 2-HEAD)

Year of Mfg.:   1997
Condition:   Good Condition   
Elect./Voltage:   600 V, 60 Cy, 3 Ph.
Value New:   Please call
Price:   $ 36,500 USD    
Financing: $ 742 National Capital Leasing
Region:   SOUTHEAST (Click for Regional Map)
Description:   (view full)

HEESEMANN LSM-8 Wide Belt Sander (2) Heads

54" (1,300 mm) max. width (1) Segmented cross-belt & (1) Longitudinal segmented platen heads.

Head Configuration:

1st Head:
Segmented cross-belt, 5/8" wide segments (86 total) with "CTS" control, abrasive belt size 5.9" x 244", inside chevron belt 5.9" x 191", dual speed head with 11 KW motor. 

2nd Head: Segmented wide belt polishing platens, 5/8" wide segments with CTS control, 11 KW motor, 126" x 53" abrasive belt size;

3rd Station: Outfeed rotary panel cleaning brush.


  All heads have HESSEMANN's patented "CTS" selective pressure adjustment system

 Sensors spaced every 5/8" (16 mm) sense part configuration; (2) mm part thickness variation can be sanded without sand throughs, pressure for each segment can be pre-programmed to provide less pressure on the outer edges or more in the center if required.

  The "CTS" computer control will hold approx. (20) programs or part configurations.

Equipped with & Features

 Outfeed rotary panel cleaning brush with single end adjustment, 2 HP motor

 Air blast abrasive belt cleaners on all heads.

  Variable feed speed from 13 to 82 FPM, 6.5 HP feed drive

 Motorized thickness opening 1/4" to 3-5/32" max.

    Special Note:
    Comment: You can't go wrong, it's a Heesemann
    Written By: Joe Retzlaff  
    *Dimensions:120" L x 93" W x 90" H
    *Weight:16,500 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.