|
|
|
|
|
|
For Immediate Help Contact: |
|
|
|
| EXF #: | SX-012766 | |||
| Brand: |
CASADEI |
|||
| Model: | LIBRA 6 TCCTT-135 | |||
| Machine Type: |
WIDE BELT (50" - 90", 4-HEAD) |
|||
| Year of Mfg.: | 2001 | |||
| Condition: |
Good Condition 
|
|||
| Elect./Voltage: | 220 V, 60 Cy, 3 Ph. | |||
| Value New: | $ 125,000 | |||
| Price: | $ 23,500 USD | |||
| Financing: | $ 478 National Capital Leasing | ||
| Region: | MIDWEST (Click for Regional Map) | ||
|
Description:
(view full)
CASADEI LIBRA 6-TCCTT-135 Wide Belt Sander (Veneer), (4) Heads
53" Width cap. Combination Head, Platen, Platen, Platen. Head Configuration: 1st Head: Combination head, 7" dia. Rubber covered drum and 2" wide air segmented computer controlled polishing platen, all segments are timed with sensors to conform the platen to the shape of the panel to eliminate sand throughs on veneers, 15 HP motor. 2nd, 3rd, & 4th Head: Air segmented computer controlled polishing platen, all segments are timed with sensors to conform the platen to the shape of the panel to eliminate sand throughs on veneers, 2, 3, and 4th motor are 15 HP each. Specifications:  Working width 1350 mm (53") Working height with fixed table (constant pass line ) 160 mm Minimum working height 3 mm Overall sanding belt length 2620 mm (103"). Conveyor belt drive motor 0.8 HP Conveyor belt speed, 4.9 to 9 m/Min (15 - 29 FPM) Operating pressure 6 BarEquipped with & Features: Abrasive Belts with electronic tracking and pneumatic tension Automatic part thickness setup, motorized part thickness adjustment with LED readout 0" to 6" opening. Infeed & outfeed spring loaded holddown rolls. Motor load meters, main sanding head motors with disc brakes Emergency full width swing bar on infeed, emergency stop buttons on infeed & outfeed. 14" Infeed conveyor load area and Star Delta reduced voltage starters; SIEMENS electric. |
| Special Note: | |
| Comment: | This is a true Veneer Sander, do not hesitate! |
| Written By: |
|
| *Dimensions: | Available from product manager |
| *Weight: | Please call |
|
*Dimensions & Weight data are based on 3rd party information and could be incorrect;
please verify & confirm if accurate dimensions & weight are required.
|
|
|
|
|
|
|
|
CASADEI LIBRA 6-TCCTT-135 Wide Belt Sander (Veneer), (4) Heads
53" Width cap. Combination Head, Platen, Platen, Platen.
Head Configuration:
1st Head: Combination head, 7" dia. Rubber covered drum and 2" wide air segmented computer controlled polishing platen, all segments are timed with sensors to conform the platen to the shape of the panel to eliminate sand throughs on veneers, 15 HP motor.
2nd, 3rd, & 4th Head: Air segmented computer controlled polishing platen, all segments are timed with sensors to conform the platen to the shape of the panel to eliminate sand throughs on veneers, 2, 3, and 4th motor are 15 HP each.
Specifications:
Working width 1350 mm (53")
Working height with fixed table (constant pass line ) 160 mm
Minimum working height 3 mm
Overall sanding belt length 2620 mm (103").
Conveyor belt drive motor 0.8 HP
Conveyor belt speed, 4.9 to 9 m/Min (15 - 29 FPM)
Operating pressure 6 Bar
Equipped with & Features:
Abrasive Belts with electronic tracking and pneumatic tension
Automatic part thickness setup, motorized part thickness adjustment with LED readout 0" to 6" opening.
Infeed & outfeed spring loaded holddown rolls.
Motor load meters, main sanding head motors with disc brakes
Emergency full width swing bar on infeed, emergency stop buttons on infeed & outfeed.
14" Infeed conveyor load area and Star Delta reduced voltage starters; SIEMENS electric.
53" Width cap. Combination Head, Platen, Platen, Platen.
Head Configuration:
1st Head: Combination head, 7" dia. Rubber covered drum and 2" wide air segmented computer controlled polishing platen, all segments are timed with sensors to conform the platen to the shape of the panel to eliminate sand throughs on veneers, 15 HP motor.
2nd, 3rd, & 4th Head: Air segmented computer controlled polishing platen, all segments are timed with sensors to conform the platen to the shape of the panel to eliminate sand throughs on veneers, 2, 3, and 4th motor are 15 HP each.
Specifications:
Working width 1350 mm (53") Working height with fixed table (constant pass line ) 160 mm Minimum working height 3 mm Overall sanding belt length 2620 mm (103"). Conveyor belt drive motor 0.8 HP Conveyor belt speed, 4.9 to 9 m/Min (15 - 29 FPM) Operating pressure 6 BarEquipped with & Features:
Abrasive Belts with electronic tracking and pneumatic tension Automatic part thickness setup, motorized part thickness adjustment with LED readout 0" to 6" opening. Infeed & outfeed spring loaded holddown rolls. Motor load meters, main sanding head motors with disc brakes Emergency full width swing bar on infeed, emergency stop buttons on infeed & outfeed. 14" Infeed conveyor load area and Star Delta reduced voltage starters; SIEMENS electric.
Home Office
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
