For Immediate Help Contact:
Dan Wolters
(800) 374-5009 ext. 376
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Joe Retzlaff ext.348
EXF #:   SX-012691  


Model:   REGAL 530
Machine Type:  

WIDE BELT (50" - 90", 3-HEAD)

Year of Mfg.:   2006
Condition:   Good Condition   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New:   $ 110,000
Price:   $ 34,700 USD    
Financing: $ 706 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)
Description:   (view full)

BIESSESAND REGAL 530 -1350 Wide Belt Sander, 3-Head.

53" Width cap. and with Hard Rubber  Drum, Medium Durometer Rubber Drum, Medium Rubber Drum.  Vacuum hold down feed belt powered by high pressure blower floor mounted net to sander, Panel  cleaning brush and rotary blow off air jets on out feed end of machine.

Head Configuration:

  1st Head: 250 mm dia. Grooved Calibrating/Sanding rubber roller  approx. 85 shore 30 HP motor.

  2nd Head: 250 mm dia. Calibrating/Sanding roller with 65 Shore rubber coating 25 HP motor.

  3rd Head: 250 mm dia. Calibrating/Sanding roller with 45 Shore rubber coating 25 HP motor.

  All heads with Sanding belt air jet cleaning. 

Standard Equipment: 

  Base is monocoque shell type, nut and bolt free, constructed in thick steel tube, electro-welded using robot technology to guarantee maximum rigidity and precision.

  Standard support rollers arrangement (1) on both infeed and outfeed.

  Sanding Belt dimensions. 1,370 mm x 2,620 mm (54" x 103").

  Min. and max. material thicknesses 3 mm - 200 mm (1/8" - 7.8").

  Feed belt speed 5/10 MPM (16.5 - 33 FPM), 60 Shore rubber belt.

  Two-speed gear motor 1.1 kW (1.5 HP) feed drive; automatic conveyor belt tracking.

 Constant Pass Line

  Dust extraction hood 160 mm (6.3") diameter.

At the time of this listing the Horse Power rating for the sanding heads has not been verified, that information will be confirmed soon.

Equipped with & Features:

  Electronic Control unit running BIESSESAND "sanding machine software" Ver. 5.0.  It displays Working thickness and feed speed, Delays and advances for timed operations. 

  Conveyor bed raises & lowers by (4) heavy duty trapezoidal screws anchored externally to the base, supported by thrust bearings and coupled by means of stiffener bars to guarantee perfect alignment and stability.

  Electronic display of workpiece thickness.

  Support rollers: one at the infeed and one at the outfeed end of the conveyor bed.

  Rubber coated pressure rollers located before and after each of the sanding heads.

  Electronic sanding belt tracking system.

  Automatic StarDelta starter on main motors.

  Automatic brake on sanding head motors.

Machine weighs 4140 kG (9109 Lbs); 94 kW power requirement 460 volt 3 phase.

  The dust collector manifold can be shipped with the machine but there will be charge to have it taken down, basically the labor cost to have that done.

For calibrating and Solid Wood sanding. 2006 year built and installed in may or 2007. Single owner machine. 

    Special Note: Great Value
    Comment: Good condition (3) drum Widebelt - available now!
    Written By: Dan Wolters  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.