WYSONG & MILES 303 DISC / SPINDLE SANDER
 alt = 'WYSONG & MILES 303 DISC / SPINDLE SANDER' title='WYSONG & MILES 303 DISC / SPINDLE SANDER'/>
|
|
|
|
|
|
For Immediate Help Contact: |
|
|
|
| Brand: |
WYSONG & MILES |
||
| Model: | 303 | ||
| Category: |
SANDERS-STROKE/EDGE/DISC |
||
| Machine Type: |
DISC / SPINDLE SANDER |
||
| Year of Mfg.: | N/A | ||
| Condition: |
Cleaned and checked 
|
||
| Elect./Voltage: | 220/440 V, 60 Cy, 3 Ph. | ||
| Value New: | $ 8,000 | ||
| Price: |
$ 2,500 USD |
(Convert) | |
| Financing: | $ 51 National Capital Leasing | ||
| Region: | SOUTH (Click for Regional Map) | |||
| EXF #: | SS-011418 | |||
|
Description:
(view full)
WYSONG & MILES NO. 303 COMBINATION DISK AND OSCILLATING SPINDLE SANDER
This machine is two in one. It features a 26″ disk sander with a 15″ X 34″ titling table (to 45 degrees) on one side. On the other you will find an oscillating spindle sander featuring a 24″ X 24″ tilting table (15 degrees forward and 35 degrees backward) with a 2″ X 8″ oscillating spindle.  Power for each is provided via a 5 HP motor. A swing out arm holds a 2 gallon bucket to the side of the machine for small parts or waste. Machine is 220V/440V/3 Phase. The only repair we see is a braze on the motor mount which is a very old repair and does not effect machine operation. ● This fully functional machine has been fully cleaned and checked |
| Special Note: | |
| Comment: | WYSONG & MILES NO. 303 COMBINATION DISK AND OSCILLATING SPINDLE SANDER ready for immediate delivery ! |
| Written By: |
|
| *Dimensions: | Available from product manager |
| *Weight: | Please call |
|
*Dimensions & Weight data are based on 3rd party information and could be incorrect;
please verify & confirm if accurate dimensions & weight are required.
|
|
|
|
|
|
|
|
WYSONG & MILES NO. 303 COMBINATION DISK AND OSCILLATING SPINDLE SANDER
This machine is two in one. It features a 26″ disk sander with a 15″ X 34″ titling table (to 45 degrees) on one side. On the other you will find an oscillating spindle sander featuring a 24″ X 24″ tilting table (15 degrees forward and 35 degrees backward) with a 2″ X 8″ oscillating spindle.
Power for each is provided via a 5 HP motor. A swing out arm holds a 2 gallon bucket to the side of the machine for small parts or waste.
Machine is 220V/440V/3 Phase.
The only repair we see is a braze on the motor mount which is a very old repair and does not effect machine operation.
● This fully functional machine has been fully cleaned and checked
This machine is two in one. It features a 26″ disk sander with a 15″ X 34″ titling table (to 45 degrees) on one side. On the other you will find an oscillating spindle sander featuring a 24″ X 24″ tilting table (15 degrees forward and 35 degrees backward) with a 2″ X 8″ oscillating spindle.
Power for each is provided via a 5 HP motor. A swing out arm holds a 2 gallon bucket to the side of the machine for small parts or waste. Machine is 220V/440V/3 Phase. The only repair we see is a braze on the motor mount which is a very old repair and does not effect machine operation. ● This fully functional machine has been fully cleaned and checked
Home Office
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
