OAKLEY H-5 EDGE SANDER (OSCILLATING DOUBLE SIDED)
alt = '' title=''/>
|
|
|
|
For Immediate Help Contact: |
|
|
|
| Brand: |
OAKLEY |
||
| Model: | H-5 | ||
| Category: |
SANDERS-STROKE/EDGE/DISC |
||
| Machine Type: |
EDGE SANDER (OSCILLATING DOUBLE SIDED) |
||
| Year of Mfg.: | 1989 | ||
| Condition: |
Good Condition 
|
||
| Elect./Voltage: | 480 V, 60 Cy, 3 Ph. | ||
| Value New: | $ 15,000 | ||
| Price: |
$ 3,725 USD |
(Convert) | |
| Financing: | $ 76 National Capital Leasing | ||
| Region: | EASTERN CDN (Click for Regional Map) | |||
| EXF #: | SS-011382 | |||
|
Description:
(view full) OAKLEY H-5 Double Sided Edge Sander.  General Specs: With 7.5 HP -1,800 RPM TEFC motor; (2) 8-1/2" x 57-1/2" Cast Iron platens; 8" x 164" abrasive belt, 4,680 FPM belt speed. Equipped with: One 11" x 62" Cast iron side table on one side and (1) 19" x 64" cast table on the other side, (1) cast iron radius tilting end table, end table tilts 0 ° - 45°; 6" vertical table travel w/hand wheel adjustment. Features: Rubber covered direct drive pulley and idler pulley,Complete with: Magnetic starter with overload protection, (8) dead head radius ends with graphite covering, and (1) steel covered spare head roll. |
| Special Note: | Best Buy |
| Comment: | A real workhorse. |
| Written By: |
|
| *Dimensions: | 102" L x 36" W x 52" H |
| *Weight: | 1,500 Lbs |
|
*Dimensions & Weight data are based on 3rd party information and could be incorrect;
please verify & confirm if accurate dimensions & weight are required.
|
|
|
|
|
|
|
|
OAKLEY H-5 Double Sided Edge Sander.
General Specs: With 7.5 HP -1,800 RPM TEFC motor; (2) 8-1/2" x 57-1/2" Cast Iron platens; 8" x 164" abrasive belt, 4,680 FPM belt speed. Equipped with: One 11" x 62" Cast iron side table on one side and (1) 19" x 64" cast table on the other side, (1) cast iron radius tilting end table, end table tilts 0 ° - 45°; 6" vertical table travel w/hand wheel adjustment. Features: Rubber covered direct drive pulley and idler pulley,Complete with: Magnetic starter with overload protection, (8) dead head radius ends with graphite covering, and (1) steel covered spare head roll.
Home Office
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
