DIMTER S 50 OPTIMIZING CUTOFF SAW
alt = '' title=''/>
|
|
|
|
For Immediate Help Contact: |
|
|
|
| Brand: |
DIMTER |
||
| Model: | S 50 | ||
| Category: |
SAWS - OPTIMIZING/DEFECT |
||
| Machine Type: |
OPTIMIZING CUTOFF SAW |
||
| Year of Mfg.: | 2003 | ||
| Condition: |
Very good condition 
|
||
| Elect./Voltage: | 460 V, 60 Cy, 3 Ph. | ||
| Value New: | $ 65,000 | ||
| Price: |
$ 35,000 USD |
(Convert) | |
| Financing: | $ 712 National Capital Leasing | ||
| Region: | EASTERN CDN (Click for Regional Map) | |||
| EXF #: | SO-280271 | |||
|
Description:
(view full)
4" x 12" Wide max. board capacity; highly accurate Push Feed Saw, left-hand version (material feeds from right-to-left), 18'-6" infeed & 8' outfeed table.
 Equipped with: 7.5 HP Arbor motor, 1.5 HP pusher bar Servo motor, 197 FPM max. feed speed; Servo controlled pusher arm travels full length of board, measures, positions itself and feeds board into saw; capable of single-piece & pack cutting modes. Features: 12" Max. board width cap., 3/8" x 3/4" min. to 3-15/16" max. board thickness, max. infeed material length 17'4", cuts softwood or hardwood. Complete with: "SCS Smart Control System", photo eye, fluorescent crayon defect sensor, 500 mm dia. saw blade. "Opticom" Assist Controller via 12" touchscreen; automatic measuring, optimizing & movement of the saw feed, are completely controlled through the OPTICOM Controller. The S-50 is a great machine for anybody with something to saw because it is high performance, flexible, economic, exact, and safe. Put an end to out-dated production methods and invest into your future! These saws are maintenance-free, they require no setting, adjusting, and changeovers. Simple to operate and they provide maximum safety with their unique protection hood. The OptiCut S 50 is equipped with optimizing software and saw calculates the best way to cut incoming lumber lengths according to your cutting list. (1) owner. |
| Special Note: | |
| Comment: |
| Written By: |
|
| *Dimensions: | Available from product manager |
| *Weight: | Please call |
|
*Dimensions & Weight data are based on 3rd party information and could be incorrect;
please verify & confirm if accurate dimensions & weight are required.
|
|
|
|
|
|
|
|
4" x 12" Wide max. board capacity; highly accurate Push Feed Saw, left-hand version (material feeds from right-to-left), 18'-6" infeed & 8' outfeed table.
Equipped with: 7.5 HP Arbor motor, 1.5 HP pusher bar Servo motor, 197 FPM max. feed speed; Servo controlled pusher arm travels full length of board, measures, positions itself and feeds board into saw; capable of single-piece & pack cutting modes.
Features: 12" Max. board width cap., 3/8" x 3/4" min. to 3-15/16" max. board thickness, max. infeed material length 17'4", cuts softwood or hardwood.
Complete with: "SCS Smart Control System", photo eye, fluorescent crayon defect sensor, 500 mm dia. saw blade.
"Opticom" Assist Controller via 12" touchscreen; automatic measuring, optimizing & movement of the saw feed, are completely controlled through the OPTICOM Controller.
The S-50 is a great machine for anybody with something to saw because it is high performance, flexible, economic, exact, and safe. Put an end to out-dated production methods and invest into your future! These saws are maintenance-free, they require no setting, adjusting, and changeovers. Simple to operate and they provide maximum safety with their unique protection hood. The OptiCut S 50 is equipped with optimizing software and saw calculates the best way to cut incoming lumber lengths according to your cutting list.
(1) owner.
Equipped with: 7.5 HP Arbor motor, 1.5 HP pusher bar Servo motor, 197 FPM max. feed speed; Servo controlled pusher arm travels full length of board, measures, positions itself and feeds board into saw; capable of single-piece & pack cutting modes. Features: 12" Max. board width cap., 3/8" x 3/4" min. to 3-15/16" max. board thickness, max. infeed material length 17'4", cuts softwood or hardwood. Complete with: "SCS Smart Control System", photo eye, fluorescent crayon defect sensor, 500 mm dia. saw blade. "Opticom" Assist Controller via 12" touchscreen; automatic measuring, optimizing & movement of the saw feed, are completely controlled through the OPTICOM Controller. The S-50 is a great machine for anybody with something to saw because it is high performance, flexible, economic, exact, and safe. Put an end to out-dated production methods and invest into your future! These saws are maintenance-free, they require no setting, adjusting, and changeovers. Simple to operate and they provide maximum safety with their unique protection hood. The OptiCut S 50 is equipped with optimizing software and saw calculates the best way to cut incoming lumber lengths according to your cutting list. (1) owner.
Home Office
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
