For Immediate Answers Contact:
(800) 374-5009 ext. 349
Intl. +1 (704) 841-2001
DIMTER OPTICUT 260
OPTIMIZING CUT-OFF SAW
|Year of Mfg.:||2019|
|Elect./Voltage:||480 V, 60 Cy, 3 Ph.|
|Value New:||$ 230,000|
|Price:||$ 152,500 USD|
|Financing:||$ 3,031 National Capital Leasing|
|Region:||ATLANTIC CDN (Click for Regional Map)|
DIMTER MODEL OPTI-CUT 260 Optimizing Cut Off Saw :
Feeds right-to-left; capacity 30-260 mm (1.18"- 10.2")
Saw blade Diam.: 500 mm X 30 mm bore
Workpiece Length min/max: 400mm - 6300 mm (15.75" - 248")
Workpice width Min/Max: 30mm - 260 mm (1.18" - 10.2")
Workpiece Thickness Min/Max: 12mm - 80 mm (.472" - 3.15")
Rectangular section max: 200 mm X 60 mm, 260 mm X 12 mm and 160 mm X 80 mm
Minimum length after the saw: 140mm (5.5")
Wood curve in all direction maximum 10 mm in 1 meter (.39" in 39")
Thickness tolerance: +/- 3 mm ( 1/8")
Cutting tolerance: +/- 0.8 mm - 1.5 mm (0.032" - 0.059") Minimal tolerance is with 1 meter length and tolerance max is for piece longer then 2,500 mm
Progessive drive up to 250 meter/minute ( 812 FPM)
Cutting/feeding cycle: 0.7 to 1.2 second
Main saw motor: 10 HP
Feed drive motor 4 HP
With table support for (2) marker 5 meter long (195") with infeed section 6,300 mm (248")
Detection for (3) choice of fluorescent
Automatic width contactless detection with lase for up to (16) different products, minimum thickness for detection 12 mm (.47:)
Belt infeed with variable speed 6,300 mm long (248")
Saw and Outfeed
Feed roller with electric height adjustment
Adaptation kit for pointed and fluffy wood
8" Max. & 1" min. board width cap., thickness from 5/8" - 3-1/8" max., board length from 16" min. - 16' max., outfeed length can be as short as 5"; cuts softwood or hardwood.
Equipped with: 10 HP - 4,100 RPM Arbor motor, 15-3/4" dia. saw blade; 10 HP Servo drive feed motor accelerates material up to 750 FPM, (3) pneumatically operated top rollers & (1) driven bottom drum roller positively feeds board to saw, then stops quickly for saw to make precision cut.
System consists of: (2) manual marking stations with cross angle 10" wide belt conveyor; adjustable marking table to suit different board widths.
Measuring station: Cycle type roller conveyor where board length is measured by double wheel measuring system while top mounted luminescent camera detects crayon defect marks, up to (8) grades detectable.
Transport belt: 10" Wide infeed belt between measuring station & saw, 20' length to process full length cap. board (can be shortened).
Saw Station features: Saw stroke cylinder with acceleration-and-deceleration unit for very high cutting speed; material feeds from right-to-left (LH Version); patented "Waste Gate" eliminates short waste & end trims at saw blade.
Outfeed & Sorting: 10" x 37' Long accelerating belt conveyor to sorting station with (4) kickers, (1) extra sort can be taken over the end of the transport belt; 2 HP feed drive; kickers are encoder pulse controlled and sort by any combination of length, grade and width; can be programmed to kick singularly or to kick in "2's or 3's" for larger heavier boards.
End of belt is also programmable as a sorting station for very long fixed lengths, salvageable finger joint lengths or long waste pieces.
Separate control cabinet with: Industrial PC-type computer (multi-tasking, Bus system) with 15" VGA monitor, 101-key board, hard disk for data storage & floppy disk drive; controls all system functions including measuring, optimizing, cutting & sorting.
Software program handles: (16) Board groups, each with (8) grades & (200) fixed lengths; production statistics on quantities, grades & times; graphical representation of boards; simulation of board data; full fault indication and "onboard" diagnostic. -
|Written By:||Louis Sicotte|
|*Dimensions:||Available from product manager|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.