; Used OMGA T 521 SNC OPTIMIZING PUSH FEED CUTOFF SAW
You are not logged in   Login  |  Register  |  Help
 
HOME > SAWS - OPTIMIZING/DEFECT > SO-010452 > RETURN

Additional Photos (Click to view Larger)

For Immediate Answers Contact:

Jeff Terrill
(800) 374-5009 ext. 349
Intl. +1 (704) 841-2001
jeff.terrill@exfactory.com

If not available, try his/her backup:
Jim Reedy ext.455
jim.reedy@exfactory.com
EXF #:   SO-010452  
Brand/Model:  

OMGA T 521 SNC

Machine Type:  

OPTIMIZING PUSH FEED CUTOFF SAW

Year of Mfg.:   2006
Condition:   Very good condition   
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
Value New:   $ 50,000
Price:   $ 19,000 USD    
Financing: $ 386 National Capital Leasing
Region:   WEST COAST (Click for Regional Map)

Description:

OMGA T 521 SNC -7600 Automatic Crosscutting Saw System.

Suitable for cutting up to 25' long incoming boards; cuts single or multiple pieces stacked in packets; CNC Programmable Pusher accurately positions lumber to selected lengths. Without crayon marking.

Up-cutting Cutoff Saw with cutting cycle speeds from (0.5 - 1.0) Sec; 20" dia. blade; feed system with tail clamp and a 25' long 10° incline infeed table to keep lumber against fence-line.

  Specifications:

  Cutting cap. with 20" dia. blade: 12-5/8" Wide x 5-1/2" thick material; 25' max. infeed lumber length.; 7 HP saw motor drives arbor at 3,400 RPM; "200 FMP" pusher, 196 FPM feed speed at 100 Lbs. max. material weight.

  The OMGA T 521 SNC Features:

  Onboard controller: Cuts to length & optimizes based on length (step down optimization); 2-line display, 3-1/2" floppy disk drive (optional) and (2) RS-232 serial ports.

  Infeed table: Flat metal surface at 10° incline to ensure material remains flat against fence for ergonomic loading operation.

  Pneumatic cylinder: Controls the saw stroke, speed adjustable via flow controls & regulator, located at the front of the machine; adjustable blade guard to clamp workpiece, clamp activates automatically with cutting cycle.

  Capacity varies according to incoming lumber lengths, cutstock lengths and saw cycle speed which averages 12 - 16 cycles/Min.

  Includes:

  12' Long steel inclined outfeed receiving table with back fence.

    Special Note:
    Comment: RARE 25' INFEED CAPACITY!!! IF YOU CAN USE IT, THERE'S NOT 1 IN 1000 LIKE THIS ONE!
    Written By: Jeff Terrill  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.