USED ROSENQUIST EG 6342 A HIGH FREQUENCY EDGE GLUER
 alt = 'Used ROSENQUIST EG 6342 A HIGH FREQUENCY EDGE GLUER' title='Used ROSENQUIST EG 6342 A HIGH FREQUENCY EDGE GLUER'/>
|
|
|
|
|
|
For Immediate Help Contact: |
|
|
|
| Brand: |
ROSENQUIST |
||
| Model: | EG 6342 A | ||
| Machine Type: |
HIGH FREQUENCY EDGE GLUER |
||
| Year of Mfg.: | 1984 | ||
| Condition: |
Very good condition 
|
||
| Elect./Voltage: | 440 V, 60 Cy, 3 Ph. | ||
| Value New: | $ 70,000 | ||
| Price: | $ 19,900 USD | (Convert) | |
| Financing: | $ 405 National Capital Leasing | ||
| Region: | EASTERN CDN (Click for Regional Map) | |||
| EXF #: | RF-010548 | |||
|
Description:
(view full)
ROSENQUIST EG6342A45 High Frequency Press
 63" x 42" curing area 4 1/2" thickness cap., Front loading, wide opening 45° top platen, 30° slant face, 10 kW HF generator with solid-state rectifiers enables curing of up to 1,000 sq./in. of glue line/Min. Side pressure via (9) pneumatic cylinders, each 5" bore x 4" stroke, End pressure via (6) pneumatic cylinders each 5' bore X 4" stroke. Top lid pressure is applied by (2) pneumatic cylinders, each 6" bore x 20" stroke. Complete with: Automatic digital timing cycling- Press table is built at 30 degree angle for ease of use Each side and end cylinder is equipped with on/off valve for selective pressure zones if required Layup table with manual (by hand crank) feeder (newly installed in early 2018) |
| Special Note: | |
| Comment: | Fully checked and ready to operate for you |
| Written By: |
|
| *Dimensions: | Available from product manager |
| *Weight: | Please call |
|
*Dimensions & Weight data are based on 3rd party information and could be incorrect;
please verify & confirm if accurate dimensions & weight are required.
|
|
|
|
|
|
|
|
ROSENQUIST EG6342A45 High Frequency Press
63" x 42" curing area 4 1/2" thickness cap.,
Front loading, wide opening 45° top platen, 30° slant face,
10 kW HF generator with solid-state rectifiers enables curing of up to 1,000 sq./in. of glue line/Min.
Side pressure via (9) pneumatic cylinders, each 5" bore x 4" stroke,
End pressure via (6) pneumatic cylinders each 5' bore X 4" stroke.
Top lid pressure is applied by (2) pneumatic cylinders, each 6" bore x 20" stroke.
Complete with:
Automatic digital timing cycling-
Press table is built at 30 degree angle for ease of use
Each side and end cylinder is equipped with on/off valve for selective pressure zones if required
Layup table with manual (by hand crank) feeder (newly installed in early 2018)
63" x 42" curing area 4 1/2" thickness cap., Front loading, wide opening 45° top platen, 30° slant face, 10 kW HF generator with solid-state rectifiers enables curing of up to 1,000 sq./in. of glue line/Min. Side pressure via (9) pneumatic cylinders, each 5" bore x 4" stroke, End pressure via (6) pneumatic cylinders each 5' bore X 4" stroke. Top lid pressure is applied by (2) pneumatic cylinders, each 6" bore x 20" stroke. Complete with:
Automatic digital timing cycling- Press table is built at 30 degree angle for ease of use Each side and end cylinder is equipped with on/off valve for selective pressure zones if required Layup table with manual (by hand crank) feeder (newly installed in early 2018)
Home Office
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
