HOME > PANEL SAWS - OVER $25,000 > PH-012476 > RETURN

MAYER PS 80 FRONT LOAD, AUTOMATIC PANEL SAW



For Immediate Help Contact:
Bob Bullin
(800) 374-5009 ext. 346
Intl. +1 (704) 841-2001
bob.bullin@exfactory.com
If not available, try his/her backup:
Jim Reedy ext.455
jim.reedy@exfactory.com
}
Brand:  

MAYER

Model:   PS 80
Category:  

PANEL SAWS - OVER $25,000

Machine Type:  

FRONT LOAD, AUTOMATIC PANEL SAW

Year of Mfg.:   2013
Condition:   Very good condition   
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
Value New:   $ 120,000
Price:   $ 28,500 USD
    (Convert)
Financing: $ 580 National Capital Leasing
Region:   NORTHEAST (Click for Regional Map)
EXF #:   PH-012476  
Description:   (view full)

MAYER PS 80 FRONT LOAD, AUTOMATIC PANEL SAW

  Specifications:
125.9" (3,200 mm) Cutting length & 122" (3,100 mm) pull back, 3.14" (80 mm) max. saw blade projection,

12 HP (9 kW) main saw motor, 320 mm main saw blade (3,800 RPM), 30 mm bore dia.; 1.5 HP (1.1 kW) score blade, 150 mm (8,680 RPM), 30 mm bore.

Electronically controlled saw blade height adjustment, electronically controlled scoring blade horizontal (side-to-side) adjustment; "QUICK CHANGE" main & scoring blade system.

  Saw Carriage:
Infinitely variable forward cutting speed from 5 - 262 FPM (1.5 - 80 MPM), constant return speed of 262 FPM (80 MPM);

Automatic cutting length adjustment, rack & pinion drive (not chain), AC Servo motor drives on the saw carriage with rack & pinion on hardened & ground guideways

  Pusher Fence:
Electronically controlled overhead program fence, forward speed from 0 - 82 FPM (0 - 25 MPM), return speed of 196 FPM (60 MPM); fence retracts 122" (3,100 mm) behind cutting line, AC Servo motor drives on the pusher fence with rack & pinion on hardened & ground guideways.

(6) Material gripper clamps open up to 80 mm (3.1"), of which (3) are closely spaced in cross-cut area and the other (3) are at equal distance in rip cut area.

  Operator & Machine Control:
Mayer "PC 5400" + Windows operating system with "REAL TIME" graphic display, 14" color monitor mounted in a pivoting console;

3-COM Network interface 10/100 MBs with RF45 (TP) connection; (2) serial & (1) parallel interfaces & SVGA graphics adapter, data input by keyboard or downloading from office PC is possible.

PC 5400 Control system features automatic cutting length (material is scanned by sensor underneath the packet on the saw bed), electronically controlled automatic cutting height adjustment (also can be used for grooving by entering depth and width of groove at control)

Automatic trim calculation, constant display of remaining material in both axis during programming (eliminates need for operator calculations during programming).

  Complete With:
Left angle crosscut fence 78.7" (1,999 mm) long, automatic cross-cut aligner from .75" - 47.2" (19 - 1,199 mm) with automatic presetting)

Rear slotted pressure beam to minimize offcut, (3) front mounted air flotation tables 79" x 24" (2,000 x 600 mm), segmented transparent plastic safety guards on front of pressure beam & wire mesh screen enclosure around rear machine table.

  Actual model is MAYER PS/80/3200

    Special Note: SOLD
    Comment: Motivated seller says "MAKE A REASONABLE OFFER"... under power & available for inspection!
    Written By: Bob Bullin  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.