For Immediate Help Contact:
(800) 374-5009 ext. 329
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Torry Hiddema ext.371
MOULDERS - FEED THROUGH
MOULDER (FEED THROUGH)
|Year of Mfg.:||2017|
|Elect./Voltage:||400 V, 50/60 Cy, 3 Ph.|
|Value New:||€ 68,500|
€ 42,900 EUR
|Financing:||€ 873 National Capital Leasing|
|Region:||EUROPE (Click for Regional Map)|
KENTWOOD M 509 Feed Through Moulder:
5-Head (B-R-L-T-B), working cap. 230 mm X 150 mm (9.05" x 5.9")
Electronic control for spindle adjustment, touch screen and memory redial set-up
Head sequence: Bottom 10 HP, right 7.5 HP, left 7.5 HP, top 15 HP and bottom 10 HP motor. Mechanical spindle brakes.
Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. All spindles equipped with digital readouts. Mechanical readouts for pressure elements and chip breakers.
Minimum working lengths: 23.5" min. individual piece, 10.2" min. end to end pieces
Feed works: Inverter driven 5 HP feed system with feed speeds of 18 - 80 FPM. Infeed Complete with: (1) powered roller in the table.
Infeed table 1.9 M (75"), chromed tables and fences and (1) powered roller in the table.
Central lubrication, manual table lubrication pump, side pressure roller mounted to infeed table, sound enclosure and "Short stock" attachment at right spindle for short parts.
Weight: 8,377 Lbs.
Note: Moulder heads and set-up stand are not included
|Comment:||Demo machine used in Laboratory for test purposes only!|
|Written By:||Louis Sicotte|
|*Dimensions:||151" L x 77" W x 83" H|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.