For Immediate Help Contact:
(800) 374-5009 ext. 329
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Torry Hiddema ext.371
MOULDERS - FEED THROUGH
MOULDER (FEED THROUGH)
|Year of Mfg.:||2006|
|Elect./Voltage:||575 V, 60 Cy, 3 Ph.|
|Value New:||$ 85,000|
$ 42,900 CAD
|Financing:||$ 873 National Capital Leasing|
|Region:||EASTERN CDN (Click for Regional Map)|
CANTEK - C230-5, ...Feed Through Moulder w/Transfer to Double-End Cutoff Saw.
5-Head (B - R - L - T - B). Working cap. 9-1/16" x 5".
Bottom 7.5 HP, right 7.5 HP, left 10 HP motor, top 15 HP and bottom 15 HP motor.
Spindle dia. 40 mm with cutterhead speed of 6,000 RPM.
All spindle adjustments except 1st bottom head with mechanical digital readouts. Chipbreaker and pressure element at top spindle with mechanical digital readouts for accurate adjustment.
Feed System: 4 HP CARDAN Drive, 20 - 82 FPM, variable feed speed. Full width driven table roller at outfeed.
Heavy cast iron base, infeed straightening table 2M (6-1/2').
Chromed table plates & fences.
Manual Waxilit pump.
Full sound & safety enclosure with safety interlock, operator/spare parts manuals, and setup tools.
Electrics conform to UL/CSA & CE specifications.
Outfeed driven belt conveyor 10" wide x 16' long.
Professionally made transfer system to double-end Cutoff Saw with 42" to 16' cap,; set to cut both ends of 3/4" thick hardwood.
|Comment:||Moulder and Double-End Cutoff Saw at the outfeed!|
|Written By:||Louis Sicotte|
|*Dimensions:||157" L x 74" W x 78" H|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.