For Immediate Help Contact:
Torry Hiddema
(800) 374-5009 ext. 371
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Louis Sicotte ext.329
EXF #:   MF-013437  


Model:   SM-623L
Machine Type:  


Year of Mfg.:   2002
Condition:   Very good condition   
Elect./Voltage:   208/240/480 V, 60 Cy, 3 Ph
Value New:   $ 85,000
Price:   $ 33,500 USD     (Convert)
Financing: $ 681 National Capital Leasing
Region:   MID ATLANTIC (Click for Regional Map)
Description:   (view full)

LOBO SM-623 L Feed Through Molder

6-Head (B-R-L-T-T-B), working capacity 9-1/16" x 5-1/4".

  Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, top 10 HP and bottom 10 HP motor.

  Spindle dia. 40 mm with cutterhead speed of 7,200 RPM. All spindles with mechanical readouts.

  5.5 HP variable feed motor with feed speed from 18-78 FPM.

  Machine is currently wired for 240 / 3 Phase Voltage. 

  Owner states that Motors 4 / 5 / 6 were replaced with heavier duty motors than the orginal equipment. Screw mechanism to horizontally adjust head #3 replaced with much heavier duty equipment than the original. The light-duty motor that moved head #3 horizontally shorted out and was removed. Head #3 currently can't adjust vertically. There is a small roll pin that sheared off and needs to be replaced. Currently the head is adjusted with a hand drill to move the head horizontally as needed. For vertical adjustments spacers are used underneath cutterhead to raise or lower. These issues do not effect running quality of the machine. 

  Infeed table 2 M (6'6"), with side pressure feed roller mounted to table. Manual waxilit pump, sound enclosure and interior flex piping.

  Seller will include 25 cutter heads with machine.

  This machine will also include a 10 HP Dust collection System, complete with 14" Nordfab piping and manifold, to handle the sawdust and chips this machine produces. 

  Dimensions (L x W x H) L 156" / W 70" / H 69", Approximate Molder Weight is 8000 lbs.

Seller's List of items included with this purchase -

LOBO Model # 623L
6-Head Heavy Duty Molder / currently wired for 208/240
10HP Industrial Vacuum System with bag house with Nordfab clip lock heavy duty duct-work
SIEMENS industrial shutoff for molder / 440V capacity
SIEMENS shut off and EATIN magnetic line-starter switch for Dust collection system.
Approximately 200 LF of #6 100 amp wire and 2" conduit and fittings.

The following 40 MM bore cutterheads:
2 x 9" Tersa / carbide
3 x 6" Terminus / carbide
2 x 9 1/2" Carbide helical
Corrugated Steel Heads 1 x 9 1/2" 1 x 9" 2 x 6" 3 x 4" 6 x 2 1/4"
1 x 2" Dado carbide
1 x 1" Cove carbide
Williams & Hussey Heads 2 x 7" and 2 x 3"

(6) Saw blades bored 40 mm for ripping or splitting moldings
Wrenches and all other setup tools in a custom cabinet with wheels.Additional feed rollers and hold-downs
(2) Custom cabinets completely filled with approx. 2000 sets of corrugated and Williams & Hussey steel knives neatly numbered and organized.


    Special Note: SOLD
    Comment: LOBO SM-623 L Feed Through Molder ready for immediate delivery !
    Written By: Torry Hiddema  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.