For Immediate Help Contact:
Dale Granger
(800) 374-5009 ext. 331
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Torry Hiddema ext.371


Model:   OGM-1236 UNCB


Machine Type:  


Year of Mfg.:   2008
Condition:   Good Condition   
Elect./Voltage:   220 V, 60 Cy, 3 Ph.
Value New:   $ 245,000
Price:   Request Quote
Region:   MID ATLANTIC (Click for Regional Map)
EXF #:   GQ-010413  
Description:   (view full)

OKAMOTO OGM-1236 UNCB CNC Cylindrical Grinder


  Swing over table 12.6"

  Distance between centers 36"

  Max. table travel 50"

  Power table traverse speed 0 to 400 IPM

  Manual pulse generator 0.00001", 0.0001", 0.001"

  Table swivel angle 0 to 8.5°

  Feed rate overide 0 to 200% (max. feed rate 157 IPM)

  Wheel head total stroke 11.8" (X-Axis)

  Wheelhead swivels + 30°

  Wheelhead automatic infeed 0.00001" to 0.002"

  Continuous feed rate 0 to 160 IPM

  Wheelhead power rapid stoke 1.5"

  Grinding wheel size 14" x 1.5" x 5"

  Grinding wheel speed 1770/2,000 RPM

  Grinding wheel spindle motor 7.5 HP

  Workhead center taper MT #4

  Work head spindle bore 0.7"

  Workhead spindle speed 10 - 500 RPM

  Workhead swivel angle + 30° / - 90°

  Tailstock taper MT #4

  Minimum Programmable increment: 0.00001"

Equipped with:

  Fanuc 21i-TB CNC control

  Two Axis simultaneous CNC control

  CNC Programming for contouring, multiple diameters, & dressing

  Conversational or G and M Code programming Std

  Quick easy set-up (Designed for optimum operator convenience.)

  RS232C Port

  Fanuc red cap servo motors for the axis movements

  Low Friction Material applied to the sliding surfaces of slide table & wheel head

  Coolant system

  Separate transformer


    Special Note:
    Comment: A Condition like this AND less than 1/2 PRICE of a NEW ONE!
    Written By: Dale Granger  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    Surface grinding is done on flat surfaces to produce a smooth finish. It is a widely used abrasive machining process in which a spinning wheel covered in rough particles cuts chips of metallic or nonmetallic substance from a workpiece, making a face of it.