HOME > EDGEBANDERS-OVER $25,000 > EO-280366 > RETURN


For Immediate Help Contact:
Bob Bullin
(800) 374-5009 ext. 346
Intl. +1 (704) 841-2001
bob.bullin@exfactory.com
If not available, try his/her backup:
Louis Sicotte ext.329
louis.sicotte@exfactory.com
EXF #:   EO-280366  
Brand:  

BIESSE

Model:   STREAM B1
Machine Type:  

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Year of Mfg.:   2006
Condition:   Good Condition   
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Value New:   $ 200,000
Price:   $ 34,750 USD     (Convert)
Financing: $ 707 National Capital Leasing
Region:   MID ATLANTIC (Click for Regional Map)
Description:   (view full)

BIESSE STREAM B1 9.0 ... Production Egebander with Pre-Milling & Corner Rounding 

Specifications:

  Capacity,  0.4 - 15 mm edge thickness cap., min. panel width 100 mm, panel thickness 10 - 60 mm, min. panel length 150 mm. 


  Pre-Milling Unit: With jump control & side copying unit for managing warped panels, 2-position infeed fence, digitals readouts.


  NC 410 Controller with: Graphic interface on MS-Windows 2000 Professional, 32-bit operating system; high resolution LCD color screen, unlimited" number of working programs, each with functions for remote control of processing units; fault diagnostic, bar code reader adaptable; etc.


  Automatic (2) coil vertical feed magazine for coil material up to 3 mm thickness with automatic changeover.


  Patented Glue System w/pre-melt, large separated granular hopper for easy filling & high gluing capacity, with roller applicator (reversible);


  Pressure Section, (1) large driven pressure roller & (6) pneumatic secondary pressure rollers. 

Workstations:
 


  End Trimming:
Double motor front & rear linear end trimming unit "IT 46" (0.4 HP/0.3 kW - 12,000 RPM motors ea.); pneumatic chamfer setting, 0° - 15° adjustable. ÷


  Pre/Rough Trimming:
Top & bottom "RS 10" (1.75 HP/1.3 kW - 12,000 RPM motor ea.), pneumatic exclusion & positioning from control panel.


  Radius/Bevel Trimming:
Top & bottom (0.87 HP/0.65 kW - 12,000 RPM motor ea.), tiltable 0° - 30°, pneumatic exclusion from operator panel.


  Corner Rounding:
4-Motor for leading & trailing edges.


  Profile Scraping Unit:
Top & bottom with collection box.


  Flat Glue Scrapers:
Top/bottom to remove potential glue squeeze-out.


  Buffing Unit:
Top/bottom, ozcillating/tilting "SZ 30" w/pneumatic exclusion control from control panel & 0.67 HP/0.5 KW- 1,400 RPM motors;


  Hot Air Unit:
Top/Bottom hot air blowers to reactivate/smooth heavy pvc radiused edges. 

Complete With:
- Motorized top pressure beam with powered V-belt hold-down, electronic positioning by NC controller.
- 80 mm wide Heavy Duty feed chain w/rubber pads, 
- 4 HP feed drive for feed variable speeds of 26 - 78 FPM. 
-  Pneumatic Pre-set Stop System for most adjustments via the control panel on top & bottom trim, fine trim, and scraper station,
- Electronic frequency inverter, electronic DC brakes on all trim motors.
- Sound cabins for all trim work stations, outboard panel support.

Note: Actual Model ...  BIESSE STREAM B1 9.0

    Special Note:
    Comment: Heavy Duty Production Edgebander with a lot of features!
    Written By: Original Seller  
    *Dimensions:0" L x 0" W x 0" H
    *Weight:0 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.