For Immediate Help Contact:
Bob Bullin
(800) 374-5009 ext. 346
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Louis Sicotte ext.329
EXF #:   EO-012376  


Model:   OLIMPIC K560
Machine Type:  


Year of Mfg.:   2016
Condition:   Very good condition   
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
Value New:   $ 95,000
Price:   $ 49,500 USD     (Convert)
Financing: $ 1,007 National Capital Leasing
Region:   NORTHEAST (Click for Regional Map)
Description:   (view full)

Includes the "perfect condition" DOUCET XPRS-36-5-18-D Return Conveyor  [FR-010287]


  Edge Capacity, 0.4 to 6 mm (0.016 to 0.25") for strip feeding.

  Panel Capacity:  
Min. Panel width 60 mm (2.375"); Min Panel length 140 mm (5.5");
Min./max. Panel thickness 8 - 54 mm (0.375" - 2.125"); Minimum distance between panels 600 mm (24").

Equipped With:

  Pre-milling station: (2) 2.0 HP (1.5 kW) motors, to rectify/clean panels already sized.

  Adjustable In-feed Fence: Manually pre-set with digital indicator, pneumatic in/out positioning.

  Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils.

  Gluing Station: For EVA (Hot Melt) with Quick change/disconnect Teflon glue pot for fast glue tanks change if needed. Heat-up time approx. 10 Min.

  Pressure Section: Manual digital positioning; Teflon coated pneumatic driven roller & (2) spring loaded idle rollers


  End Trimming Station: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0° - 15° for straight & angle cutting. 

  Top & Bottom Trimming Unit:  2 x 0.7 HP - 12.000 RPM motors, capable of tilting & pneumatic positioning for (3) settings, flush/bevel/radius  trimming for quick setup.

  Corner Rounding Unit "Round 2M": corner rounding unit with (2) 0.80 HP independent motors that slide on THK guides.

  Top & Bottom Profile Scraping Unit: with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. 

  Glue scraping Unit: Eliminates any excess glue.

  Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°.

Operator & Machine Control: 

  "STARTOUCH" Controller with 12" touchscreen display, capable of storing (100) programs. 

  Machine automation by PLC function and encoder positioned in the panel feed track pinion. 

  Diagnostics for a quick solution to errors. Process statistics data, ie. No. of pieces/edges, and track feeding.

Features & Complete With:

  2-Speed feed-speed of 40 &  60 FPM (12 & 18 MPM); 1 x 2.5 HP feed drive motor; 

  200 Hz frequency inverter for all trimming units;

  Manual adjustable top hold-down pressure beam;

  Full sound enclosure cover and outboard panel support.

  Actual Model is SCM OLIMPIC K 560 T-ER2

DOUCET XPRS-36 Return Conveyor (Included): 

This return conveyor is for "LEFT-HAND" feed Edge Banders with a "RIGHT-HAND" return conveyor back to the operator with PVC covered powered rollers. Specially designed for use with smaller edge banders.


  Over-all dimensions of the receiving/transfer/return section is 63" x 78" (63" long x 36" wide receiving/transfer table + 36" wide return conveyor section).

  The XPRS-36 system will handle a panel 90" long x 52" wide max. when finishing the long side only or 52" long x 52" wide max. when finishing all (4) sides without operator assistance, min. panel size is 4" x 12".

  Variable feed speed from 0 - 40 FPM automatically receives-and-transfers panel with (12) Urethane transfer belts onto the return conveyor side (2" lower);

  Approx. 18' long (over-all length) return conveyor conveys panel back to the operator.  


    Special Note: Best Buy
    Comment: Very well maintained machine - includes the Return Conveyor!
    Written By: Bob Bullin  
    *Dimensions:190" L x 67" W x 59" H
    *Weight:3,500 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.