You are not logged in   Login  |  Register  |  Help

Additional Photos (Click to view Larger)

For Immediate Answers Contact:

Bob Bullin
(800) 374-5009 ext. 346
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Louis Sicotte ext.329
EXF #:   EO-012370  


Machine Type:  


Year of Mfg.:   2015
Condition:   Cleaned and checked   
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
Value New:   $ 56,800
Price:   Please call    
Region:   SOUTHEAST (Click for Regional Map)


VITAP - ECLIPSE, ...Semi-Automatic Contour (Curved Panel or Round Tables) Edge Bander:

Curved (Contour) Edgebanding: Unique design to allow the 360° edgebanding to contoured (shaped) panels;

Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.

Reduced learning curve/expertise for operation as operator simply loads part to vacuum turntable, then activates the edgebanding cycle.


  Panel size from 200 mm to 2,400 mm (7.87" - 94.5") ; min. Internal (inside) radius 250 mm (9.875").

  Work piece Thickness: 10 to 60 mm (Note: Max. is 45 mm with 3 mm edgebanding - Min. 12 mm for trim station clearance)

Edgeband Thickness: 0.5 mm to 1 mm for panels up to 60mm thick, 2 mm for panels up to 60 mm thick, 3 mm for panels up to 45 mm thick 

  Automatic advance of banding material during edgbanding cycle.

  External (outside) radius tolerances dependent upon tape thickness and pliability;

Edge thickness of 1 mm min. = R 30 mm (1.18"); edge thickness 2 mm min. = R 50 mm (1.96"); edge thickness 3 mm min. = R 50 mm. (1.96").

Designed to apply hot melt EVA Adhesive and edgebanding (Note: 0.4 to 3 mm edgeband thickness)

Equipped with:

  Thermal-regulated glue pot heated via (2) 800 Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules.

  (2) Pressure rollers to copy the shape of the piece, automatic guillotine for coiled material up to 3 mm thickness & 45 mm height (0.125" - 1.75").

  Top & bottom trim unit with (2) 0.5 kW high frequency motors (15,000 RPM).


  Laser detection for easy length identification with closed parts without the need for additional length measurement.

The Laser also detects a tight radius and will automatically slow the speed + resume the set speed when the detected radius has passed.

The machine is  equipped with the foot pedal for manual slow down intervention as well.

  Motorized turntable for automated edgebanding application to large panels;

Holding or support arm has large vacuum cup to secure panels for edging and trimming. Maximum panel weight is 175 lbs.

Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within a 94" dia. work area.

Includes & Complete with: Centralized control panel with individual controls for all stations to enable manual feeding of panels if desired and 80 mm dia. (3") dust extraction outlet.

Special features: Foot pedal for downshifting the speed - Larger feed roller - Additional lower jockey wheel - Glue with sensor.

    Special Note:
    Comment: This one comes with a warranty!
    Written By: Bob Bullin  
    *Dimensions:83" L x 63" W x 63" H
    *Weight:1,500 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.