|Year of Mfg.:||2018|
|Elect./Voltage:||220 V, 60 Cy, 3 Ph.|
|Value New:||$ 49,500|
|Price:||$ 32,500 USD||(Convert)|
|Financing:||$ 661 National Capital Leasing|
|Region:||SOUTHEAST (Click for Regional Map)|
PRO-EDGE TECHNOLOGY PET II EDGEBANDER with PRE-MILLING:
0.4 mm - 3 mm Max. edge thickness cap., 10 mm - 60 mm (0.75" - 2.36") panel thickness cap. Minimum Panel Dimensions: 120 mm wide (4.7").
Variable feed speed from 0 - 15 MPM (0 - 49 FPM); 2 HP (1.5 kW) motor. Feed chain pads with replaceable rubberized surface inserts.
Automatic feed of coil banding and semi-automatic strip fed magazine (strips 1 - 3 mm max.); 3 mm PVC cap. guillotine.
The Strip Feed has an independent cut-off switch when using long laminate strips or pre-cut material.
Teflon Coated Glue Pot: Fast (10 - 12) Min heat-up time; 4-liter capacity. Glue pot comes with an independent variable-speed drive on Glue Applicator roller.
The pneumatic controlled glue metering cylinder allows a more accurate amount of glue to the board’s edge.
Guillotine to cut edgebanding in coils up to 3 mm thick PVC tape & all types of wood veneers and plastic laminates.
The heavy-duty hardened knife ensures a longer life of quality cuts.
Pneumatically controlled pressure section with (4) pressure rollers; The 1st roller applies even pressure across the entire edge of the panel;
The 2nd and 3rd rollers are conically shaped to apply pressure on the top and bottom of applied edge; the 4th roller reapplies even pressure across the entire edge of the panel.
Each roller is pneumatically pressurized to ensure a strong adhesion between the panel to the glue and the glue to the edge banding.
The heavy-duty drive transmission ensures the rotation speed of the 1st roller matches the feed speed of the machine.
Pre-Mill Unit with: (2) 2.5 HP (1.85 kW) -12,000 RPM Counter Rotating High Frequeny motors.
Adjustable tracers and digital numerical positioning indicators & a pneumatic plunge and retraction, all controlled from the PLC.
Double Motor End Trim Saws, (2) 1 HP (0.75 kW) - 12,000 RPM High Frequency motors sit in a secure machined way with manual locking devices ensuring an accurate vibration free end trim with a high quality cut on both thin and thick edges of banding.
Both motors can be independently tilted from a 0° to 15° bevel. Precision linear prismatic bearing guides ensure a flawless end trim.
Top & Bottom Trim Station: (2) 1.3 HP (1 kW) - 12,000 RPM High Frequency motors are manually adjusted to tilt from a 45° to 90° bevel for the final finish top and bottom trim of the panel.
Manual adjustments are “locked” in place to ensure there is no movement from any vibration. This station is also equipped with an air blow-off on the top cutter and dust collection on both top and bottom cutters.
Top & Bottom Scrape Station: Quick working or exclusion setting of both Top & Bottom units, micrometer adjustment; features thick chrome plated copying shoes, body of unit is cast iron to ensure vibration-free scraping during operation.
Top & Bottom Buffing Unit: (2) 0.50 HP (0.37 kW) - 1,400 RPM Motors soften and polish the sharp edges on the panel.
The Buffing Station has (2) fully adjustable universal mounts for easy adjustment. Buffers can be used with either cloth or abrasive discs.
The "PET II" Edgebander comes standard with features that are upgrades on our competitors’ machines. From the Infeed to the Buffing, each station is independent for a more serviceable machine.
No matter if you are using coil-type edgebanding or pre-cut edgebanding strips, this machine was designed to meet the high quality of product today’s market demands.
The glue application is uniquely controlled by a pneumatic metering wiper and hardened application roller followed by a 4-Roller Pressure Station.
From short to long production runs, our high quality finished product doesn’t require touching up after exiting the machine.
Sound enclosure protects the operator from noise and debris.
Owner’s Manual with mechanical & electrical schematics and parts breakdown.
Actual Model is PRO-EDGE TECHNOLOGY PET II
NOTE: Return conveyor pictured is not included with this machine...see listing # FR-010265 for information about the Pro-Edge Return Conveyor.
|Special Note:||Like New|
|Comment:||Like new, hardly used - Current owner is changing Product Line!|
|Written By:||Bob Bullin|
|*Dimensions:||176" L x 40" W x 63" H|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.